Abstract:In this study, microstructures and mechanical properties of (TiBw+Ti 5 Si 3 )/TC11 composites fabricated by hot isostatic pressing and 2D forging were investigated. A α + β titanium alloy TC11 (Ti-6.4Al-3.5Mo-1.4Zr-0.25Si) was used as a matrix material. The TiB 2 addition corresponding to 5.0 and 3.5 vol% of TiB w and the Si addition corresponding to 2.0, 4.0 and 6.0 vol% of Ti 5 Si 3 were used as additives to the TC11 titanium alloy. TiB w and Ti 5 Si 3 reinforced TC11 titanium matrix composites were fabricated by hot isostatic pressing and 2D forging in the α + β temperature field at T = 980 °C. The microstructure of the as-forged composites was composed of nanoscale Ti 5 Si 3 particle within the β-phase and TiB w around TC11 matrix particle. The TiB w reinforcer tend to be distributed along the stretching deformation direction. Compared with the TC11 matrix alloy, the strength of the (2Ti 5 Si 3 +5TiB w )/TC11 composite after 2D forging at room temperature increased by about 90 MPa due to the fine-grain strengthening of the α-phase, the precipitation strengthening of the nanoscale Ti 5 Si 3 silicide, and the load transfer efficiency of TiB w . The main failure mechanism of the composites at room temperature is fracture of TiB w followed by ductile failure of the matrix. (2Ti 5 Si 3 +5TiB w )/TC11 is thought as the optimal choice for engineering application, which UTS and El. at 600 °C are 851 MPa and 11%, respectively, and corresponding values of parameters at 750 °C are 385 MPa and 21%, respectively. Compared to the maximum service temperature 500 °C of TC11 alloy, the service temperature of (2Ti 5 Si 3 +5TiB w )/TC11 composite can be improved by over 100 °C while retaining the similar tensile strength and elongation.

Fabrication and mechanical property of high strength-plasticity TiB2P/Al composites

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

In Situ TiBw/Ti–6Al–4V Composites with Novel Reinforcement Architecture Fabricated by Reaction Hot Pressing

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Revealing the formation, strengthening and toughening mechanism of a new (Ti3AlC2+Al2O3)p /Al3Ti composite with strength-ductility synergy

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

Microstructures and tensile properties of low-cost TiBw/Ti–6Al–4V composites by vacuum reactive hot pressing

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Microstructures and mechanical properties of (TiBw+Ti 5 Si 3 )/TC11 composites fabricated by hot isostatic pressing and subjected to 2D forging

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

High strength and plasticity TiBw/TA15 composites with a novel columnar network structure

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Microstructure and Mechanical Properties of TiN–TiB2–hBN Composites Fabricated by Reactive Hot Pressing Using TiN–B Mixture