Abstract:Bridge vehicle load is an important parameter that is relevant to the construction and maintenance stages of a bridge. In recent years, a large number of orthotropic steel deck bridges have been built in China, and it is urgent to establish a fatigue load model that reflects the actual traffic conditions of the bridges. This study has investigated the variation of vehicles over time on four grades of road (expressway, first-class highway, second-class highway and urban main road) according to the weight-in-motion (WIM) data. Subsequently, the statistical model was established in terms of speed, axle weight, and gross weight of vehicle (GVW) acting on the four grades of road. Finally, a fatigue load model of vehicles on the four grades of road was established based on a two-stage method. The results show that (1) the speed of vehicle on the four grades of road obeys the unimodal distribution; (2) the GVW of two- and three-axle vehicles on the four grades of road belongs to the t-distribution and the log-normal distribution, respectively; (3) the GVW of four- and five-axle vehicles on expressways is a finite mixed distribution, whereas the GVW of four- and five-axle vehicles on the remain three grades of road obeys the log-logistic and log-normal distribution respectively; (4) the GVW of six- and above axle vehicles on expressways and second-class highways obeys a finite mixed distribution with two variables, whereas that on first-class and urban main roads obeys the log-normal distribution; (5) the axle weight of standard fatigue vehicles differs remarkably on different grades of roads, which is difficult to describe the fatigue damage in a uniform standard fatigue vehicle.

THE SAFETY ASSESSMENT OF BRIDGE IN HEYUAN CITY UNDER SUPER-LOAD

Site-Specific Fatigue Load Spectrum for Urban Bridges

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

A Study on Assessment Method of Traffic Load Effect of Bridge in Service

Improved bridge capacity rating methods based on system reliability assessment

Study On Fatigue Traffic Loading For Highway Bridges In China

Reliability-based vehicle weight limit determination for urban bridge network subjected to stochastic traffic flow considering vehicle-bridge coupling

Integral Lifting Construction and Monitoring of Qifeng Bridge in Huzhou City

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Theory and Empirical Analysis of Bridge Load Limitation under the Action of Typical Heavy-Duty Vehicles

The Disaster Control And Risk Prevention Of Bridge Structure Under Overweight Vehicle

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

Simplified Model and Design Equations for the Collision between Over-high Truck and Bridge Superstructures

Finite-element and simplified models for collision simulation between overheight trucks and bridge superstructures

Dynamic Reliability Assessment of Heavy Vehicle Crossing a Prototype Bridge Deck by Using Simulation Technology and Health Monitoring Data

Tests for Collision Between Over-High Trucks and Steel Bridge Superstructures

Fatigue Damage Analysis on Existing Reinforced Concrete Bridge under Overloading

WIM-based vehicle load models for urban highway bridge