Abstract:Advances in Structural Engineering, Ahead of Print. To investigate the fatigue reliability of reinforced concrete (RC) bridges under stochastic traffic loading and the effectiveness of limiting the truck load, this study presented an analysis method for evaluating the bridge fatigue reliability under the action of random traffic flows based on truck weight limits. Firstly, a simply RC T-beam bridge was selected as an example to illustrate the presented approach, and the traffic-induced stress spectrum of the tensile rebars in the critical girder of the bridge was obtained. Secondly, based on the collected traffic data from two specific areas, the corresponding random traffic flow was simulated respectively, and then calibrated using the weight limit referring to the current regulation and overload violation rates (VR) to exclude overweight trucks. Finally, based on the S–N curve from Eurocode 3 and Miner's cumulative damage model, the effects of violation rate, average daily truck traffic (ADTT) and truck weight limit (TWL) on the fatigue reliability index of the bridge were studied. The results show that heavy duty trucks will induce serious cumulative fatigue damage, and degrade the durability of RC bridges, while limiting the truck weight can obviously slow down the reduction of the fatigue reliability index. Both the ADTT and the VR can significantly affect the fatigue reliability of the bridge. More specifically, the bridge fatigue reliability index shows a clear downward trend with the increase in the ADTT and the VR. Furthermore, the performance to satisfy the target fatigue reliability of the bridge was compared between TWL for each type of trucks and unified TWL for all the trucks, and then the unified TWL for all the trucks are determined to ensure the target reliability index of the RC bridge after 100 years' service life.

Fatigue Damage Analysis on Existing Reinforced Concrete Bridge under Overloading

Site-Specific Fatigue Load Spectrum for Urban Bridges

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

Test on Flexural Performance of RC Bridge Member after Overload Reinforced with Externally Bonded FRP

Overloading Simulation Fatigue Experiment of Bridge Member with and Without CFRP Reinforcement

Investigation of Highway Bridge Load Effect for Fatigue Reliability Analysis

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Fatigue reliability assessment of welded joints in steel bridges considering multiple effects

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

Probabilistic fatigue life assessment of bridge welded joints considering steel corrosion

Fatigue reliability evaluation of reinforced concrete bridges under stochastic traffic loading based on truck weight limits

Fatigue Safety Assessment of Concrete Continuous Rigid Frame Bridge Based on Rain Flow Counting Method and Health Monitoring Data

Fatigue Reliability Evaluation of Old Steel Bridges Based on Probabilistic Fracture Mechanics

Evaluating Probabilistic Traffic Load Effects on Large Bridges Using Long-Term Traffic Monitoring Data

Vehicle survey and local fatigue analysis of a highway bridge

Fatigue load model of orthotropic steel deck for port highway in China