Abstract:2.5-D braided high-alumina fabric-reinforced silica matrix composite materials are being developed as functional structural composites with thermal load-bearing capacity for the top thin face sheet of an integrated thermal protection system (TPS). This study seeks to elucidate the mechanical behavior of a 2.5-D braided top face sheet composite material subjected to off-axis compression, while the sandwich TPS is under deflection caused by the bending moment resulting from the temperature gradient in the thickness direction and the aerodynamic pressure on the top face sheet panel. The effective compressive modulus and ultimate strength along the warp direction are significantly lower than those along the weft direction. Both decrease as the off-axis loading angle increases, indicating anisotropy. A nonlinear compressive stress–strain response with extensive damage along the warp yarn direction, while the weft yarn direction exhibits a quasi-linear response with minor damage before fracture. Within the framework of continuum damage mechanics, fiber kinking and transverse inter-fiber cracking of fiber bundles with the linear damage evolution law are all considered simultaneously for the progressive damage model. To account for the interaction between multiple damage mechanisms in the fiber yarn, a joint degradation induced by multiple damage mechanisms is first proposed. The analysis reveals that the anisotropy of failure under compression is primarily due to the warp fiber bundle's much larger undulation than the weft fiber bundle, which causes severe bending-dominated damage. Using the calibrated model, the qualitative effects of material thickness and yarn geometry size on the compressive mechanical properties of materials are analyzed.

Analysis of Fiber Breaking in Fiber/matrix Composites under Torsional Loads

Micro Failure Analysis of Fiber Metal Laminates

Multiple Cracking of Fiber/Matrix Composites - Analysis of Normal Extension

Study on Fracture of Fiber-Reinforced Polymeric Composites Using Spiral Notch Torsion Test

The mechanics of matrix cracking in brittle-matrix fiber composites

Analysis for a Broken and Debonging Fiber in Ductile Matrix Composites

An Experimental Study on the Fracture of a Unidirectional Carbon Fiber-Reinforced Composite under Quasistatic Torsion

Influence of statistical fiber strength distribution on matrix cracking in fiber composites

Transverse Cracking of Orthotropic Composite Laminates: a Fracture Mechanics Approach

Fracture of a piezoelectric fiber/elastic matrix composite

Analysis of Multiple Cracks in Laminate Composites under Anti‐plane Static Loads

Effect of Multiple Matrix Cracking on Crack Bridging of Fiber Reinforced Engineered Cementitious Composite

Steady-state and multiple cracking of short random fiber composites

Matrix cracking of fiber-reinforced ceramic composites in shear

Interactive Growth of Multiple Fiber-Bridged Matrix Cracks in Unidirectional Composites

Elastic-Plastic Fracture Behavior Analysis On A Griffith Crack In The Cylindrical Three-Phase Composites With Generalized Irwin Model

Anisotropic failure analysis of 2.5-D braided composites under compression

Stochastic Process of Multiple Cracking in Discontinuous Random Fiber Reinforced Brittle Matrix Composites

Simulation of crack propagation of fiber reinforced cementitious composite under direct tension

Cyclically Thermomechanical Plasticity Analysis for a Broken Fiber in Ductile Matrix Composites Using Shear Lag Model

Failure Analysis of Fiber-Reinforced Composites under Multiaxial Cyclic Stress