Abstract:Anodic aluminum oxide (AAO) photonic crystal films with Sn nanoparticles electrodeposited at the bottom were prepared using a pseudo-sine-pulse anodization technique followed by an alternating current electrodeposition. Moreover, a pore-widening post-treatment was performed for the Sn electrodeposited films. The phase structure, microstructure and structural color properties of the specimens with different preparation histories were examined. The Sn electrodeposition enabled production of brightly colored AAO photonic crystal films after a short-duration anodization (40 anodization cycles) in a sulfuric acid electrolyte solution at a temperature (around 20 °C) near to room temperature, which is technology-friendly relative to the conventional anodization conditions when using sulfuric acid electrolyte solutions, e.g., after 80–300 anodization cycles at around 0 °C. Moreover, the pore-widening treatment was demonstrated to be convenient and controllable in tuning the porosities and structural color properties of the Sn electrodeposited films. The peak wavelengths of the reflectance spectra were nearly linearly blue-shifted from 681 to 574 nm with increasing pore-widening time from 0 to 8 min, concomitant with a structural color change from bright-red to yellowish-green. Meanwhile, the peak reflectances were linearly enhanced from 59 to 84%, corresponding to an increase of the brightness of the films. The linearly varied peak wavelengths and peak reflectances were related to a linear increase of the porosities of the stem and branched layers in the films with pore-widening time.

Color Centers Vs Electrolytes for Si-based Porous Anodic Alumina

Nanoscale Islands and Color Centers in Porous Anodic Alumina on Silicon Fabricated by Oxalic Acid

Color-tuning method by filling porous alumina membrane using atomic layer deposition based on metal-dielectric-metal structure.

Al-assisted Anodic Etched Porous Silicon

Study on Photoluminescence from Anodic Alumina Films Formed on Silicon Substrate

Light Emission from Silicon-Based Porous Anodic Alumina Formed in 0.5 M Oxalic Acid

Anodic characteristic during anodizing of electron-beam evaporation Aluminum film on Si substrate

Dependence of blue-emitting property on nanopore geometrical structure in Al-based porous anodic alumina membranes

Strong ultraviolet and violet photoluminescence from Si-based anodic porous alumina films

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Current Regulation and Property Study of Porous Anodic Alumina Films with a Periodic Pore Structure

On the Origin of Light Emission from Porous Anodic Alumina Formed in Sulfuric Acid

Color Tuning by Local Sputtering Metal Nanolayer on Microstructured Porous Alumina

Strong Blue Emission from Anodic Alumina Membranes with Ordered Nanopore Array

Anodizing process of Al films on Si substrates for forming alumina templates with short-distance ordered 25 nm nanopores

A Method of Color Modulation Based on Porous Alumina and Atomic Layer Deposition

Review—The Variation of Anodization Conditions and the Structural Properties of Nanoporous Anodic Alumina (NAA) within Different Acidic Solutions

Pore diameter-dependence photoluminescence spectra for porous anodized aluminum oxide membranes fabricated in different acid solutions

Easy preparation of anodic aluminum oxide photonic crystal films with tunable structural colors

Kelvin Probe Force Microscopy Study on Anodization-Related Variations of Porous Silicon Nanostructures Combined with Photoluminescence and Raman Scattering

Characterization of Stain Etched Porous Si with Photoluminescence, Electron-Paramagnetic-Resonance, and Infrared-Absorption Spectroscopy