Abstract:The work aims to study effects of different heating temperature on mechanical properties of Ni-P/Ti/DLC multilayer films. Ni-P layer was prepared on die steel substrates by adopting electroless nickel-phosphate plating process, and Ti transition layer and DLC protective layer were deposited by adopting filtered cathodic vacuum arc (FCVA) technology. Compo第 47 卷第 7 期唐昆等:加热温度对 Ni-P/Ti/DLC 多层膜力学性能的影响 ·53· sition of the multilayer films at different heating temperature was analyzed with Raman spectrometer, Hardness, elastic modulus, adhesion, and scratch morphology of the multilayer films were characterized with nano indentor, nano scratch tester and SEM. The results of Raman spectrometer showed that AD/AG value and sp content of DLC film on the multilayer films increased as heating temperature rose, and variation amplitude of AD/AG increased obviously at 400 °C. The results of nano indention test showed that both hardness and elastic modulus of multilayer films first increased and then decreased as heating temperature rose, and reached the peak at 300 °C. The films did not fracture during nanoindentation. The results of nano scratch test and SEM showed that critical load A1 of multilayer films increased as heating temperature rose; critical load A2 did not change obviously in the range of 25~200 °C, but it increased significantly in the range of 300~400 °C. Graphitization of DLC layer is remarkable at 400 °C; mechanical properties and layer adhesion properties of multilayer films are better at 300 °C; layer adhesion properties and crack growth inhibition weaken at 400 °C, and layers exhibit greater plasticity, hence suitable heating temperature contributes to higher mechanical properties and layer adhesion properties of multilayer films.

Influence of Heat Treatment on Hardness, Elastic Modulus and Bonding Strength of Ti/Ta/TiN/TaN Nanomultilayer Coatings

Effects of Heating Temperature on Mechanical Properties of Ni-P/Ti/DLC Multilayer Films

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Mechanical Properties and Thermal Stability of TiAlN/Ta Multilayer Film Deposited by Ion Beam Assisted Deposition

Structural, Mechanical, and Thermal Properties of the TiAlTaN/TiAlBN Multilayer

Effect of different heat-treated temperatures upon structural and abrasive performance of Ni-TiN composite nanocoatings

Effect of Multilayered Structure on Properties of Ti/TiN Coating

Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments

Structure and Thermomechanical Properties of Superlattice-Stabilized TiNbTaZrSiAlN High-Entropy Coating

Ti/TiN multilayer coatings: deposition technique, characterization and mechanical properties

Fabrication and Performance of TiN/TiAlN Nanometer Modulated Coatings

Effects of Ti Content on Microstructure, Mechanical and Tribological Properties of Ti-doped Amorphous Carbon Multilayer Films

Fabrication of TiN Coatings Deposited on Laser Shock Micro-Textured Substrates for Improving the Interface Adhesion Properties of Coatings

Influence of Toughness on Tribological Performance of TiN/Ti Multilayer Coatings

Effect of heat treatment on microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Investigation of Hardness, Tribological and Adhesion Properties of TiAlNiVN HEA Films Heat Treated at Different Temperatures

The Effect of RF Sputtering Power on Structural, Nanomechanical and Tribological Properties of Single Layered TaN Coatings

Mechanical Properties and Fracture Toughness of Multilayer Hard Coatings Using Nanoindentation

Effects of Ti content on the microstructure and properties of AlCoCrFeNiTix high-entropy alloys prepared by laser cladding

Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating

Investigation on Microstructure Evolution and Visible-Infrared Property of Vacuum-Heat-Treated TiN Film