Abstract:CoCrFeNiMn high entropy alloy matrix composites with in-situ carbide and oxide particles were fabricated by thermomechanical consolidation of a mechanically milled powder at 1000 and 1150 degrees C respectively. The sample consolidated at 1000 degrees C exhibited a microstructure consisting of Cr-rich M23C6 carbide particles, spinel (Cr, Mn)(3)O-4 oxide particles, ultrafine grains with an average size of 920 nm and a major < 001 > + minor < 111 > dual fiber texture. When the consolation temperature increased to 1150 degrees C, Cr-rich M23C6 carbide particles were dissolved and the spine] (Cr, Mn)(3)O-4 oxide particles coarsened. These led to larger grains with an average size of 6.06 mu m and allowed formation of only sharp < 001 > fiber texture. This microstructural variation with the increase of consolidation temperature led to a decrease of strength and improvement of ductility. Analysis of the strengthening mechanisms reveals that grain boundary strengthening and Orowan strengthening play a major role in strengthening for the high strength sample consolidated at 1000 degrees C, while these mechanisms contribute significantly less to the strength for the sample consolidated at 1150 degrees C. It was also found that the sample consolidated at 1150 degrees C was weakened by the < 001 > texture.

Manufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ Composites

Effect of fluctuation and modification on microstructure and impact toughness of 20 wt.% Cr hypereutectic white cast iron

Effect of Fluctuation, Modification and Surface Chill on Structure of 20%cr Hypereutectic White Cast Iron

Influence of in-situ and ex-situ precipitations on microstructure and mechanical properties of additive manufacturing CoCrFeMnNi high-entropy alloys

Effect of Cr on Microstructure, Mechanical Properties, and Wear Behavior of in Situ 20 Wt.%al2o3/fe-25Al Composites

In-Situ Production of (Fe,cr)(7)c-3 Particulate Bundles Reinforced Iron Matrix Composites

Effects of Fluctuation Modification on As-cast Microstructure of Hypereutectic White Cast Iron

The microstructure evolution of equiaxed-to-columnar in compositionally graded samples from pure Fe to Fe-27 wt.%Cr fabricated by laser powder bed fusion

Microstructure and Wear Properties of<i> In Situ </i>Production of (Fe,Cr)<sub>7</sub>C<sub>3</sub> Particulate Bundles Reinforced Iron Matrix Composites

Modifying Cr/CrN Composite Structure by Fe Addition: Toward Manufacturing Cost-Effective and Tough Hard Coatings

Microstructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites

In Situ Development and High Temperature Features of CoCrFeNi-M6Cp High Entropy-Alloy Based Hardmetal

Preparation and characterisation of the Al-Cr-Fe-Mn-Mo high-entropy alloy reinforced by in-situ formed carbides

Microstructure and High Temperature Mechanical Property of Fe–Cr–B Based Metal/Ceramic Composite Manufactured by Metal Injection Molding Process

Fabrication of CoCrFeNiMn High Entropy Alloy Matrix Composites by Thermomechanical Consolidation of a Mechanically Milled Powder

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

MICROSTRUCTURE AND WEAR RESISTANCE OF CHROMIUM CARBIDE COATING IN SITU SYNTHESIZED BY VEB

Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites

(Fe, Cr)7C3/Fe Composite In-situ Synthesized by Cast Iron and Cr Bar

Microstructure Characteristics and Mechanical Properties of NiAl/Cr(Hf, Ho) in Situ Composite

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles