Abstract:High-strength titanium (Ti) alloys are progressively demanded for structural applications in weight-critical aerospace industry. Improving mechanical properties of the alloys are thus exploited in response to the requirement. In this study, a strategy of through-transus thermomechanical forging was applied to the Ti-10V-2Fe-3Al metastable β-Ti alloy, and the resulting microstructures and mechanical properties were systematically investigated in comparison to the conventional (α+β) dual-phase field forging. It is found that the through-transus thermomechanical forging significantly enhances strength, ductility and strain hardening capacity, while it is the inferior combinations of mechanical properties in the alloys subjected to the (α+β) dual-phase field forging. Microstructural characterization reveals that the former renders the hierarchical microstructure composed of intergranular αp-necklaces, and intragranular αp-rods as well as αs-lamellae in the β-matrix. The superior combinations of mechanical properties are conferred by good strain compatibility of these microstructural constituents. By contrast, the latter renders the network microstructure comprised of intergranular globular αp-phase and continuous grain boundary (GB) αGB-films as well as the intragranular αs-lamellae. Local deformation-damage is more preferred to initiate in the intergranular network structure. These findings provide fundamental understanding on the correlation between mechanical properties and microstructures, facilitating manufacturing high-performance β-Ti alloys at an industry scale using commercially available thermomechanical processing.

An Investigation of a New Near-Beta Forging Process for Titanium Alloys and Its Application in Aviation Components

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Study on Microstructure and Properties of α+β Forging and Quasi-β Forging of TC25 Titanium Alloy

Advances in Microstructure Control during Isothermal Forming of Ti-Alloy Large Complex Components by Near-β Local Forging

Strengthening of a Near β-Ti Alloy through β Grain Refinement and Stress-Induced α Precipitation

Microstructures and Tensile Properties of a High Strength Β Titanium Alloy Ti5Al4Zr8Mo7V by Near Β Forging and Β-Transus Forging

Microstructure and fatigue properties of TC4 titanium alloy treated by α+β forging process

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Recent Advances in Near‐β Titanium Alloys: Microstructure Control, Deformation Mechanisms, and Oxidation Behavior

Relationship Between Microstructure and Tensile Properties on a Near-Β Titanium Alloy after Multidirectional Forging and Heat Treatment

Forging–microstructure–tensile properties correlation in a new near β high-strength titanium alloy

Performance Analysis and Application on Ti-6Al-4V of Micro-Forging System

Aging Precipitate of Beta Forged TC17 Titanium Alloy for Aero-Engine

A new process chain combining cross-wedge rolling and isothermal forging for the forming of titanium alloy turbine blades

Achieving high strength-ductility synergy in a hierarchical structured metastable β-titanium alloy using through-transus forging

Precision Forging Process Analysis and Preform Optimization of Small Compressor Blade of Titanium Alloy

A novel composited process of solution treatment-hot gas forming and stress relaxation aging for titanium alloys

Evolution of microstructures and properties of Ti-44Al-6V-3Nb-0.3Y alloy after forging and rolling

The Effect of the Forging Process on the Microstructure and Mechanical Properties of a New Low-Cost Ti-5Al-1.5Mo-1.8Fe Alloy

Rheology of Ti-6Al-4V alloy under non equilibrium conditions during β forging

Effect of Heat Treatment on Microstructure and Tensile Properties of 2 Vol.% TiCp/near-β Ti Composite Processed by Isothermal Multidirectional Forging