Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Three-dimensional DEM Simulation on Particle Mixing Characteristics of Spout-fluid Bed

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

DEM Simulation of the Particle Dynamics in Two-Dimensional Spouted Beds

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

CFD‐DEM Simulation of the Spout–annulus Interaction in a 3D Spouted Bed with a Conical Base

DEM Simulation of the Behavior of Particles in a Spout-Fluid Bed with Immersed Tubes

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

Numerical Investigation of the Time-Related Properties of Solid Phase in a 3-D Spout-Fluid Bed

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

Three-Dimensional VOF-DEM Simulation Study of Particle Fluidization Induced by Bubbling Flow

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Computational Evaluation of Depth Effect on the Hydrodynamics of Slot-Rectangular Spouted Bed

Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations

Hydrodynamics and particles mixing in rectangular spouted bed with different base geometries using CFD-DEM

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Particle-scale Simulation of Fluidized Bed with Immersed Tubes