Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

DEM Simulation of the Behavior of Particles in a Spout-Fluid Bed with Immersed Tubes

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

DEM Simulation of the Particle Dynamics in Two-Dimensional Spouted Beds

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

DEM–LES Study of 3-D Bubbling Fluidized Bed with Immersed Tubes

Numerical simulation for character of fluid flow through packed bed

Numerical Simulation of Pulsed Fluidized Bed with Immersed Tubes Using DEM–LES Coupling Method

Discrete Element Simulation of the Hydrodynamics in A 3d Spouted Bed: Influence of Tube Configuration

Eulerian-Lagrangian Simulation of the Heat Transfer Behavior of Particles with Different Diameters in Fluidized Bed with Immersed Tube

Direct Particle Simulation of Flow Characteristics in Bubbling Fluidized Bed

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Particle dispersion and circulation patterns in a 3D spouted bed with or without draft tube

Discrete Element Method Simulation on the Immigration of Granular Matter in a Vertically Vibrating U-Tube

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach