Abstract:A novel glucose biosensor based on the electrochemical detection of enzymatically generated H2O2 was constructed by the effective immobilization of glucose oxidase (GOD) via glutaraldehyde cross-linking with a poly(thionine) (PTH)-modified Au electrode, followed by coating with a Nafion outer layer to obtain high selectivity. An electrochemical quartz crystal microbalance (EQCM) was used to track various modification procedures. The mass of the deposited PTH via cyclic voltammetric electropolymerization of thionine in aqueous H2SO4 was estimated from the “dry” frequency shift after fully removing the PTH layer via its acidic degradation, allowing us to evaluate the electroactivity per unit mass of PTH. A Nafion/glucose oxidase-glutaraldehyde/poly(thionine)/Au electrode was thus constructed for glucose sensing. We found that the PTH film is a good matrix to immobilize more GOD, and the performance of the constructed sensor is significantly improved compared with its absence, though its mediator effect on the enzyme electrode is negligible. Influence of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, was investigated. At an optimal potential of 0.7V versus the KCl-saturated calomel electrode (SCE), the glucose biosensors were linear with glucose concentration from 0.005 to ∼5mmolL−1, with high sensitivity (13.5Amol−1cm−1), short response time (within ca. 10s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated to be 5.47mmolL−1. The biosensor exhibited good storage stability, i.e., 83% of its initial response was retained after 1-month storage in a pH 7.0 phosphate buffer at 4°C. The effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated to be 6.85kUg−1 on the basis of the mass of immobilized GOD (from EQCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection), and the leakage of H2O2 from the Nafion/GOD-GA/PTH/Au enzyme electrode at the detection potential, as characterized by a scanning electrochemical microscope (SECM), was found to be an important factor influencing the ESA estimation.

Glucose Biosensors Prepared by Electropolymerization of P-Chlorophenylamine with and Without Nafion

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Amperometric glucose biosensor based on in situ electropolymerized polyaniline/poly(acrylonitrile-co-acrylic acid) composite film

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

A Nonenzymatic Electrochemical Glucose Sensor Based on Ni(Oh)(2)-Cnt-Pvdf Composite and Its Application in Measuring Serum Glucose

The Micro Network of Polyacrylonitrile (Pan)-Polyaniline (Pani)-Graphene (GRA) Hybrid Nanocomposites for Effective Electrochemical Detection of Glucose and Improved Stability

Improved Selectivity and Stability of Glucose Biosensor Based on in Situ Electropolymerized Polyaniline-Polyacrylonitrile Composite Film.

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Non-Enzymatic Glucose Sensors Composed of Polyaniline Nanofibers with High Electrochemical Performance

Amperometric Biosensor Coupled to Capillary Electrophoresis for Glucose Determination

Amperometric Glucose Biosensor Based on Chitosan with Improved Selectivity and Stability

Poly(phenylenediamine) Film for the Construction of Glucose Biosensors Based on Platinized Glassy Carbon Electrode

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

Dispersed Conducting Polymer Nanocomposites with Glucose Oxidase and Gold Nanoparticles for the Design of Enzymatic Glucose Biosensors

Amperometric Glucose Sensor Based on Coimmobilization of Glucose Oxidase and Poly(p-phenylenediamine) at a Platinum Microdisk Electrode

Amperometric Biosensor for Glucose Based on Electropolymerized Tetraaminophthalocyanatocobalt(Ii) and Phenol Films

Construction As Well As Eqcm and Secm Characterizations of A Novel Nafion/Glucose Oxidase-Glutaraldehyde/Poly(Thionine)/Au Enzyme Electrode for Glucose Sensing

Amperometric glucose sensor based on glucose oxidase immobilized in electrochemically generated poly(ethacridine)

A Facile Fabrication of a Potentiometric Arrayed Glucose Biosensor Based on Nafion-GOx/GO/AZO

Study of the Glucose Sensor Based on Potentiometric Non-Enzymatic Nafion/CZO Thin Film

Biopolymer-Clay Nanoparticles Composite System (Chitosan-Laponite) for Electrochemical Sensing Based on Glucose Oxidase