Short-time creep behavior of (TiB + TiC + Y2O3) reinforced titanium matrix composite in the range of 600 °C to 700 °C
Shiwei Han,Lijuan Xu,Yunfei Zheng,Zhenquan Liang,Dazhao Chi,Jing Tian,Shulong Xiao
DOI: https://doi.org/10.1016/j.matchar.2024.113785
IF: 4.537
2024-04-01
Materials Characterization
Abstract:A titanium matrix composite reinforced by TiB, TiC and Y2O3 was prepared by induction skull melting. The creep behavior of the composite was tested at the temperature range from 600 °C to 700 °C in short time to investigate the deformation mechanism and microstructure involution. The as-cast composite shows a typical basket-weave microstructure. At the stress of 150 MPa, the stress exponents of the composite are 3.48 at 600 °C and 5.33 at 700 °C, corresponding to the deformation mechanism mainly controlled by solute-dragging and dislocation climbing respectively. Reinforcements added hinder dislocations movement effectively, which improves the creep resistance of the composite. As the creep temperature rises, the solubility of β-Ti increases, accompanied by the precipitation of silicides with different morphologies. Silicides play a role in pinning dislocations and hindering interface from migration. The dislocation movement and rearrangement during creep lead to the formation of sub-grains.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing