Abstract:In this work, counter-gravity investment casting was used to fabricate TiAl parts with different cross-sections. A three-dimensional finite element model of counter-gravity investment casting was established based on ProCAST simulation software. The filling capacity and solidification behaviour during the counter-gravity investment casting of the Ti-48Al-2Cr-2Nb alloy were numerically investigated, and the effects of filling pressure, melt superheating temperature and mould preheating temperature were experimentally evaluated in terms of the filling integrity and casting defects. The results show that the filling pressure plays an important role in the filling capacity. Elevating properly the mould preheating and melt superheating temperatures can also improve the filling capacity. Then, counter-gravity investment casting was performed using the parameters optimised through numerical simulations, and sound Ti-48Al-2Cr-2Nb casting parts with different section sizes and shapes were produced. The as-cast microstructure of the Ti-48Al-2Cr-2Nb alloy indicates that the phase composition and morphology are largely affected by the size effect. Graphical abstract Counter-gravity investment casting was applied to fabricate TiAl parts. A FE model was established to calculate the filling capacity and solidification behaviour during the counter-gravity casting of the Ti-48Al-2Cr-2Nb alloy. The effects of filling pressure, melt superheating and mould temperature were evaluated. Based on the numerical results, sound Ti-48Al-2Cr-2Nb casting parts with different section sizes and shapes were produced with an optimised processing window. The as-cast microstructure of the Ti-48Al-2Cr-2Nb alloy indicates that the phase composition and morphology are largely affected by the size effect.

Development of Large Counter Gravity Casting Equipment with Melt-transport System

Counter-Gravity Casting Equipment and Technologies for Thin-Walled Al-Alloy Parts in Resin Sand Molds

Development and Application of Counter Gravity Casting Equipment Technology

Development of Multi-function Counter-gravity Casting Equipment for Al-alloy Parts

Study on Technology of Multifunction Counter Gravity Casting Equipment

Progress of the Counter Gravity Casting Technology in the Superalloy Large Complicated Thin-Walled Castings

PLC Control of Molten Shaping Process by the Counter-gravity Casting

Development of Pressure Control System in Counter Gravity Casting for Large Thin-Walled A357 Aluminum Alloy Components

Research on Pneumatic Control System for Counter-Gravity Casting Equipment

A Review of the Progress and Challenges of Counter-Gravity Casting

Analysis on Filling Process in Counter Gravity Casting

Equipment Technology in Low Pressure Casting for Large Magnesium Alloy Components

Development of Vacuum Counter-Pressure Casting Equipment for Copper Alloys

A counter-gravity casting system for in situ high-speed synchrotron x-ray imaging characterization

Numerical calculation and experimental evaluation of counter-gravity investment casting of Ti-48Al-2Cr-2Nb alloy

Simulation of Large Plate Castings in Counter-Gravity Mould Filling Process Based on Single-Phase LBM

Grinding/Cutting Technology and Equipment of Multi-scale Casting Parts

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

High Pressure Counter-Pressure Casting Process And Its Control System

Development of Casting Process for Thin Walled Complex-Precision Aluminum Alloy Castings

Development of Double Side Traveling Wave Magnetic Field Casting Equipment