Abstract:Publication date: 28 August 2023 Source: Solid State Phenomena Vol. 348 Author(s): Martin Hartlieb, Jean Claude Tawil, Stephane Bergeron, Per Jansson Structural high vacuum die casting has been growing significantly over the past decades. It is typically done with special (primary type) alloys, special melt treatment practices, high vacuum, a carefully engineered die casting process applying many best practices in our industry. Structural die castings are growing in size and complexity and die casting machines are getting bigger and bigger - and those castings are becoming a significant challenge with current technologies. It was now found that Rheocasting - a process of preparing a semi-solid slurry (with 30-45% solid fraction) that is injected slower and in a laminar way into the cavity, can take structural die casting to completely new heights, enable the casting of parts that would otherwise be impossible to cast and at the same time reduce or eliminate some of the current problems of structural die casting. With Rheocasting, lower purity (secondary) aluminum alloys can be used and excellent properties can be achieved as cast and heat treated (T5, T6/7). Rheocasting has had a breakthrough in the telecom and other industries, but it has now been optimized to become an essential tool in the toolbox of making structural castings. This paper shows the developments that lead to the successful series production of a large (about 4' long) hinge pillar for an Electric Vehicle (EV). It explains the challenges and how they were overcome, and some of the possibilities of the process regarding alloys, heat treatments and achievable properties. It also shows how Rheocasting can help die casters produce more complex (thin and thick walled) and very large castings with the highest integrity. It can replace structural low-pressure permanent mold (LPPM) castings and reduce wall thickness, improve tolerances and make them more economical. Rheocasting can enable die casters to enter this new market of structural castings including Gigacastings, produce parts previously thought impossible to cast (and on much smaller machines than thought), and expand the growing structural die casting market even faster and further.

Counter-Gravity Casting Equipment and Technologies for Thin-Walled Al-Alloy Parts in Resin Sand Molds

A counter-gravity casting system for in situ high-speed synchrotron x-ray imaging characterization

Research on frozen sand mold casting technology for complex thin-walled aluminum alloy castings

Effects of Hollow Sand Mold on the Microstructure and Mechanical Properties of a Low Pressure Aluminum Alloy Casting

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Grinding/Cutting Technology and Equipment of Multi-scale Casting Parts

Low pressure casting technology and forming process analysis of metal mold based on ProCAST FEA procedure

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Research and Computer Modeling of the Process of Casting Parts Alloys

A novel nonlinear pressurization method for counter-gravity casting of cross-sectional mutation structures

Controlled Cooling of an Aluminum Alloy Casting Based on 3D Printed Rib Reinforced Shell Mold

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

Producing Structural High Integrity Castings with Minimum Carbon Footprint with the Comptech-Rheocasting Process

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings.

Additive manufacturing-driven mold design for castings

Research Progress of Low Density and High Stiffness of Be-Al Alloy Fabricated by Investment Casting

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

Die Casting Die Design and Process Optimization of Aluminum Alloy Gearbox Shell

Die-Casting Die Design Based on the Application of Cae Simulation