Abstract:This paper has proposed a method for predicting an adjusting performance curve family of a centrifugal compressor stage with the inlet guide vane (IGV). The method can be separated into two steps. In the first step, a centrifugal compressor model stage is selected as a basic model stage to build the basis of prediction. Both the ordinary performance curve of the model stage without IGV and the adjusting performance curve family of the model stage at various setting angles of the IGV are obtained by experiments. Then, using the ordinary performance curve as a criterion, a non-dimensional mathematical relationship is set up between the ordinary performance curve and each curve in the adjusting performance curve family. In the second step, based on the relationship established above, a prediction is made for the adjusting performance curve family of another centrifugal compressor stage with an IGV. For this prediction, two conditions must be satisfied: 1) The adjustment must be done using the IGV of the same type as used in the first step; 2) The ordinary performance curve of the predicted model stage must have been obtained experimentally. By applying the method, a prediction was carried out for the IGV adjusting performance curve family of a centrifugal compressor stage. Comparison between the predicted results and experimental results shows that although there is relatively great discrepancy between the basic model stage and the predicted stage under the mechanical geometric construction and operating conditions, the two results agree well in most of the areas of the adjusting performance curve family. There are only greater errors of predicted results in areas of large IGV setting angle. Although the current method has some deficiencies, it still possesses some strength featuring simplicity, convenience and reliability, thus providing a practical approximate prediction method available for the centrifugal compressor manufacturers that have the model stage database, but lack the APCF for the model stages with IGV.

Preliminary Application of Parameterized Analysis Based on ADAMS in VSV's Adjusting Mechanism Design of High Pressure Compressor

An Effective Method for Improving the Lifetime of Double Acting Vane Pump

Parametric Design of Water Hydraulic Axial Piston Pump's Main Inner Parts

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

The Kinematic Analysis and Parametric Design of Beam Pumping Unit Based on ADAMS

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Numerical Investigation of a Variable Stator Vane with Nonuniform Partial Radial Gaps in an Annular Compressor Cascade

Design of A Variable Stiffness Actuator and Study on Its Variable Stiffness Characteristics

Stator re-stagger optimization in multistage axial compressor

Dynamic Analysis and Calculation on Synchronal Rotary Compressor

A Kinematics Analysis of Actuation System Based on DCM Method

Global Dimensional Optimization for the Design of Adjusting Mechanism of Variable Stator Vanes

Experiment Investigation on Secondary Flow Loss and Flow Control Mechanisms in a Variable Compressor Cascade with Penny Cavities

Mathematical Simulation and Design Optimization of a Novel Swing Vane Compressor

Study and Application of the Designing Theory of the Vane Profile for Any Rotary Vane Compressor

Effects of “S”-Type Bowed Guide Vanes on Unsteady Flow in 1.5-Stage Axial Compressors

Characterization of joint contact model considering friction of variable stator vane mechanism and application to principle-level mechanism

Simulation and Performance Analysis of Control Mechanism in Variable Displacement Swash Plate Compressor

A numerical study of multistage axial compressor stability

Dynamic Characteristic of Rotary Vane Compressor

A Practical Approximate Method To Predict Adjusting Performance Of A Centrifugal Compressor Stage With Inlet Guide