Study on Stacking Rules of Bowed Blade in Subsonic Compressor Cascade
Jun DING,Shao-wen CHEN,Song-tao WANG,Yan-fei LI,Zhong-qi WANG
DOI: https://doi.org/10.13675/j.cnki.tjjs.2017.03.012
2017-01-01
Abstract:In order to explore the selection law of bowed blade design parameters in annual compressor cas-cades with radial asymmetrical distribution of loading, by numerical simulation, the effects of different bowed heights and positive angles on aero-performance and vortex structure in flow passages of two annual cascades with different kinds of separation were analyzed for comparative study. The results show that,with the increase of positive bowed angle, a pair of concentrated shedding vortexs near trailing edge are enhanced and the cores of them get close to the middle span,which makes the loss decrease near the region between concentrated shedding vortex and corner vortex,while the loss of middle span gets thickened. In cascades where concentrated shedding vortexs have not yet formed, the impact of bowed blade is mainly on trailing edge shedding vortex in the mid-span. However,the impact is relatively unapparent. With a certain bowed height,there exists a best bowed an-gle,the best bowed angle of CDA cascade used in this study is nearly 25° with 50%bowed height in inlet 2. And the same positive bowed angle has a more significant effect on the higher loading side along the spanwise. While the positive bowed angle is relatively large,or approaches the best bowed angle,the loss peak of the higher load-ing side along the spanwise increases dramatically under the action of bowed blade,which makes the best bowed height bias toward the lower loading side along the spanwise on the assumption of same circumferential relative displacement. Or to put it another way,best bowed height should bias toward the side with higher diffusion factor unevenness along the spanwise.