Abstract:The vacuum-blowing cleaning system, utilizing positive and negative pressure mixed-delivery theory, has been adopted for the road sweeper vehicle. To enhance the solid particle separation performance and to evaluate the motion characteristics of inhaled particles under different structural parameters, the gas-solid flow in the vacuum-blowing cleaning system was investigated by using computational fluid dynamics (CFD) technology. The influence of the main structural parameters on the grade dust collection efficiency and average detention time of the inhaled particles was determined, such as suction-inlet diameter, suction-inlet inclination angle, and front baffle inclination angle. And the interplay between them was also investigated. In addition, a dust collection efficiency model was built, based on uniform design (UD) and multiple regression analysis (MRA), and subsequently verified via experiments. The results revealed that the structural parameters have significant influence on the dust collection performance. The suction-inlet diameter, front baffle inclination angle, and suction-inlet inclination angle exerted the highest, second-highest, and lowest influence, respectively. Furthermore, the interaction among structural parameters also influenced the collection performance. The highest, second-highest, and lowest levels of influence were determined for the inlet diameter/baffle inclination angle, inlet inclination angle/baffle inclination angle, and inlet diameter/inlet inclination interactions, respectively. The highest dust collection efficiency (i.e., 96.10%) and a short average detention time of particles in the chamber were realized under the following conditions: suction-inlet diameter and inclination angle: 200 mm and 110°, respectively, and front baffle inclination angle: 105°.

Optimization of inlet structure for PCF wet desulfurization dust catcher

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Performance Analysis of Dual-Channel Inward-Turning Inlets under Off-Design Conditions

A Fast Multiobjective Optimization Approach to S-duct Scoop Inlets Design with Both Inflow and Outflow

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Fast Multi-Objective Optimization Design of Gas Turbine L-inlet Duct

Numerical Simulation of Inlet and Outlet Passages for Axial Flow Pump in Drainage Pump Station

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Structure Optimization Of Cfb Reactor For Moderate Temperature Fgd

Structure Optimization Research Based on Numerical Simulation of Flow Field in Ammonia-Based Wet Sintering Flue Gas Desulfurization

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Design of Multi-Stage Contracted Inlet Duct for Cyclone Separators

Dust Collection's Efficiency of Low Reynolds Purifier via Computational Fluid Dynamic Simulation and Optimization

Experimental Study on the Synergetic Removal of Fine Particles by Wet Flue Gas Desulfurization Tower with a Flow Pattern Control Device

3-D numerical simulation of flow in oblique diffuser catalytic converter and its application on optimum structure design

SIMULATION STUDY ON DESIGN OF INLET FLUE DUCT FOR SCR DENITRIFI CATION SYSTEM

Study on Flow Field Optimization in Wet Flue Gas Desulfurization Spray Scrubber

Enhancement of particle collection efficiency considering the structural interplay: particle motion characteristics analysis

Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics

Sand Discharge Simulation and Flow Path Optimization of a Particle Separator

Application of Computational Fluid Dynamics for Optimization of Hydraulic Efficiency of Clearwell