Abstract:<p>Recently, an increasing number of small satellites have chosen electric propulsion (EP) as the propulsion system for motion control in space flights. Research on the ejected high energy plasma plumes from EP thrusters has attracted significant interest due to their interactions with the components of satellites. This work demonstrates a probe array diagnostic platform (with 67 Faraday probes on the array) that enables the acquisition of the full three-dimensional morphology of the plume current density from the near-field to the far-field of EP stationary thrusters. The plume parameters of an ion thruster including the 3-D plume morphology, divergence angle, and thrust vector angle are measured using this diagnostic platform. From 250 to 700 mm from the thruster exit, the plume field exhibits a stable divergence angle of 43.6°. By fitting circles to the contours of each cut plane, the average thrust vector angle is calculated to be 1.3°, and the repeatability error for the circle center fitting is approximately 2.2%. The current density profiles on exit cut planes demonstrate an "elliptical distortion" phenomenon in the plume shape. Using the ellipse fitting method, it is found that an elliptical shape was formed in the near-field of the plume. As the plume propagates to the far-field, the distortion of the ellipse becomes more apparent (the aspect ratio is 1:1.14). Some possible causes may be the geo-magnetic field, background vacuum environment distribution, or thruster manufacturing error. The thrust vector data can provide a basis for the control strategy of the satellites. In addition, the 3-D plume current density data can give us a comprehensive understanding of the plume plasma physics. These results may also provide an accurate and rich database for parameters for future plume simulations.</p>

Scanning Internal Probe for Plasma Particle, Fluctuation, and LIF Tomographic Measurements

Design, construction, and calibration of a three-axis, high-frequency magnetic probe (B-dot probe) as a diagnostic for exploding plasmas

All-in-one probe for exploring self-organized two-fluid equilibria in toroidal plasmas

Electrostatic Probe Diagnosis on the Plasma in the Discharge Chamber of an Electron Cyclotron Resonance Ion Thruster

Langmuir probe diagnostic suite in the C-2 field-reversed configuration

An octahedral Mach B-dot probe for 3D flows and magnetic fields in the edge of reversed field pinches

Study of plasma parameters in high enthalpy ICP-heated wind tunnel by using single Langmuir probe

A Multi-Channel Capacitive Probe for Electrostatic Fluctuation Measurement in the Madison Symmetric Torus Reversed Field Pinch.

An Ultrafast Reciprocating Probe.

Plume Plasma Measurements of a 20cm Xenon Ion Thruster Using a Multiple-Probe Array IEPC-2015-222 / ISTS-2015-b-222

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Application of Langmuir probe in high frequency plasma wind tunnel

Movable Multi-Probes For Plasma Boundary Measurement In Sino-United Spherical Tokamak

An Imaging Refractometer for Density Fluctuation Measurements in High Energy Density Plasmas

Volumetric Langmuir probe mapping of a transient pulsed plasma thruster plume

Spatial measurement in rotating magnetic field plasma acceleration method by using two-dimensional scanning instrument and thrust stand

Three-dimensional measurement of a stationary plasma plume with a Faraday probe array

Design and Optimization of a High-Time-Resolution Magnetic Plasma Analyzer (MPA)

Plasma diagnostics in spherical tokamaks with silicon charged-particle detectors

A Three Dimensional Probe Positioner

Design of a Unidirectional Reception and High Temperature Resistance Electric Field Probe for Measuring the Internal Electric Field of Plasma