Abstract:Amorphous and crystalline electrochromic WO3 films exhibit quite different optical properties during coloration process. In the present work, amorphous and crystalline electrochromic WO3 films prepared by a solution method were characterized using X-ray diffraction, scanning electron microscope, and transmission electron microscope techniques. A double-layer model with sharp interfaces was established for the fitting of the ellipsometry parameters. The results show that the proton favors amorphous films more than crystalline WO3 films. The refractive indices of both amorphous and polycrystalline WO3 films decrease while extinction coefficients increase with the inserting of H+ during the coloration process. But the optical parameters of the latter are much more sensitive to the H+ ions injected compared to the amorphous WO3 during the coloration process. That is the refractive index modulation of the crystalline WO3 films is about 53% at 633 nm while that of the amorphous films about 15% at the same wavelength. The Drude-like free electron model for crystalline WO3 and hopping mechanism of small polaron for amorphous WO3 are used to explain the difference in detail. These results are very helpful for the better understanding of the coloration process and for the design of electrochromic devices. (C) 2016 Elsevier B.V. All rights reserved.

Determination of Optical-Constants of Absorbing Crystalline Thin-Films from Reflectance and Transmittance Measurements with Oblique-Incidence

Determination of refractive indices and thickness of absorbing crystalline thin films by using prism coupler

Anisotropic Optical Constants Of In-Plane Oriented Polyfluorene Thin Films On Rubbed Substrate

Determination of the Optical-Constants and Thickness of A Highly Absorbing Film Using the Attenuated Total Reflection Technique

Reflection/transmission Measurements of Anisotropic Films with One of the Principal Axes in the Direction of Columnar Growth

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

A New Method for Determination of the Optical Constants and Thickness of Thin Film

Determination of the Optical Constants of Solar-Control Amorphous Silicon Thin Films on Float Glass

Determination of the Extinction Coefficient of a Weakly Absorbing Multilayer System

Determination of the thickness and optical constants of amorphous silicon

Measurement of Absolute Phase Shift on Reflection of Thin Films Using White-Light Spectral Interferometry

Determination of the thickness and optical properties by reflectance method

A PRECISE AND SIMPLE METHOD, THE RELATIVE TRANSMISSION FRINGE DEPTH METHOD, OF DETERMINING THE OPTICAL-CONSTANTS AND THICKNESS OF THIN SEMITRANSPARENT FILMS

The Research of a Method to Obtain the Optical Parameters of Semiconductor Films

General Theory Of Optical Reflection From A Thin Film On A Solid And Its Application To Heteroepitaxy

Optical-Constants Of A Cadmium-Sulfide Film From 200 To 900 Nm

Determining the refractive index, absolute thickness and local slope of a thin transparent film using multi-wavelength and multi-incident-angle interference

Optical Characterization of the Coloration Process in Electrochromic Amorphous and Crystalline Wo3 Films by Spectroscopic Ellipsometry

Characterization of A Metal-Clad Anisotropic Thin-Film by the Guided-Wave Method

A method to extract absorption coefficient of thin films from transmission spectra of the films on thick substrates

Optical-Properties of Extremely Thin-Films - Studies Using Atr Techniques