Abstract:This paper investigates the effect of the variation in alkoxide precursor ratio and templating agent concentration on the production of titanium silicalite (TS-1) through analysis using various physical characterisation techniques. X-ray diffraction showed clear evidence for the MFI zeolite structure and a high degree of crystallinity in all systems. For those materials prepared using a templating agent with ultra low alkali metal content, excellent agreement with previously reported unit cell parameters was obtained. For these same systems, 20% higher specific surface areas were also obtained by nitrogen adsorption. Analysis using an energy dispersive x-ray spectrometer coupled to a scanning electron microscope showed that the product typically contained between 60 and 90% of the titanium in the precursor and some dependence of titanium incorporation on the initial mixture composition was also observed. The results from Raman spectroscopy indicated titanium incorporation into the silicalite framework for all systems. For those materials produced using a templating agent with low alkali metal content, extra-framework anatase titanium dioxide was also identified at moderate Ti : Si mole ratios (>0.03) in the initial mixture. Due to its lower penetration depth, x-ray photoelectron spectroscopy (XPS) was used to characterise the titanium species in the surface layer. The XPS results indicated that a small amount of extra-framework titania was present in the surface of most of the TS-1 samples and the proportion of extra-framework material was observed to increase with both precursor alkali metal content and precursor titanium to silicon ratio.

Synthesis and characterization of titanium silicate molecular sieves with zorite-type structure

Synthesis and characterization of mesoporous titanium dioxide

Synthesis, Characterization and Catalytic Performance of Ti-Containing Mesoporous Molecular Sieves Assembled from Titanosilicate Precursors

The synthesis and characterization of titanium silicalite-1

Synthesis of Ti-containing mesoporous silicates from inorganic titanium sources

Synthesis and characterization of titanium silicalite TS-1 prepared using phosphonium ions

Synthesis of titanium silicalite-1 zeolite byusing butylamine as the template

Incorporation of Titanium into Mesoporous Silica Molecular Sieve SBA-15

Synthesis and Characterization of Mesoporous Zirconia Molecular Sieve

Structures of highly siliceous ZSM-5 zeolites and Ti- ZSM-5 zeolites obtained by indirect synthesis

Direct Synthesis and Structural Characteristics of Titanium Dioxide/Mesoporous SBA-15 Materials

Study on the Synthesis and Structure of Cu-Zsm-5 Type Molecular Sieve

Structure of Highly Siliceous ZSM-5 Zeolites and Ti-ZSM-5 Zeolites Obtained by Indirect Synthesis

Synthesis of easily shaped ordered mesoporous titanium-containing silica

Silica–Titania mixed Oxides: Si–O–Ti Connectivity, Coordination of Titanium, and Surface Acidic Properties

Cooperative Structure-Directing Effects in the Synthesis of a Low-Silica Zeolite Phillipsite Analogue

Investigation on Titanium Silicalite-1 Zeolite Synthesis Employing ATPAOH as an Organic Structure Directing Agent

Effect of organic amines during synthesis of titanium silicalite

Effect of Surface Structure and Adsorption Activity on Implanting of b-Oriented ZSM-5 Zeolite Film on Modified α-Quartz Substrate

Synthesis, characterization and catalytic properties of low cost titanium silicalite

Synthesis, characterization and application of MTS-9 with different content of titanium