Effect Of Cuo On Thermal Denox With Ammonia
Xiangsong Hou,Hai Zhang,Junxiong Huang,Junfu Lu,Guangxi Yue
2007-01-01
Abstract:The effect of CuO on the thermal DeNO(x) with addition of ammonia was experimentally studied in the temperature range used for selective non-catalytic reduction (SNCR). Experiments were conducted in a fixed bed reactor using the mixture of CuO and quartz sand as bed material, under various temperatures, NH3/NO molar ratio, and O-2 concentrations in the inlet gas stream. Baseline experiments were conducted. with pure quartz sand as bed material. Experimental results showed that CuO has catalytic effect on NO, reduction in the SNCR temperature window, with temperature ranges of 873-1023K. For the O-2-free reacting gas stream, NO, conversion rate over the bed material with 1.0%wt CuO is 5-10% higher than that of the baseline experiment. The conversion rate first increases with temperature and then slightly decreases after temperature is higher than 1150K. However, unlike over quartz sand, the NO, reduction over CuO is significantly influenced by O-2 concentration. When the O-2 volumetric concentration in the inlet gases is 1.0% or 2.0%, NO, reduction effect over the CuO-containing bed material is overwhelmed, while the NH3 oxidation is rapidly accelerated. As a result, extra NO, is formed and CuO behaves as a catalyst for NH3 oxidation. The experimental results indicate CuO could be harmful for the SNCR de-NO, process with NH3 in a coal-fired boiler in which O-2 concentration in the flue gas is normally higher than 2.0%.