Effect of iron minerals during coaling on the transformation of NO in the presence of NH3: Take pyrite as an example

Daobing Shu,Tianhu Chen,Xuehua Zou,Mengxue Li,Can Wang,Hanlin Wang,Zhengyan Han,Haibo Liu
DOI: https://doi.org/10.1016/j.scitotenv.2020.138951
2020-08-20
Abstract:Pyrite, a naturally occurring mineral, can be found extensively in coal. The change in the pyrite structure that occurs during coaling process, the ability of the pyrite-derived α-Fe2O3 to convert NO in the presence of NH3 before catalyst bed and the kinetic study were investigated in this work. The pyrite-derived α-Fe2O3 was obtained by calcining at 500, 600, 700, 800 °C and was characterized by the X-ray diffraction (XRD), N2 physisorption, the X-ray photoelectron spectrometer (XPS), the scanning electron microscope (SEM), UV-visible near-infrared spectroscopy (UV-vis DRS), the temperature-programmed desorption of ammonia (NH3-TPD) and the in situ diffuse reflectance infrared Fourier transform spectroscopy (in-situ DRIFTS). The results indicated that the α-Fe2O3 derived from natural pyrite exhibited an affirmative effect on NO conversion in the presence of NH3 at reaction temperatures of 200-450 °C, particularly at 350 °C, the pyrite-derived α-Fe2O3 displayed the best efficiency for the NO conversion. In addition, the formed sulfate derived from the oxidation of pyrite enhanced the NO conversion at the temperature of 300-450 °C, while hinder the NO conversion at 200-275 °C. The in-situ DRIFTS and kinetic studies demonstrated that both the Eley-Rideal and Langmuir-Hinshelwood mechanism contributed to the selective catalytic reduction (SCR) of NO when the reaction temperature was over 200 °C, while selective catalytic oxidization (CO) happened over 300 °C. This study favored the understanding of the NO behavior in flue gas pipeline after sprawling NH3 and the mechanism of NO conversion before the catalyst bed.
What problem does this paper attempt to address?