Abstract:In this study, we developed a dynamic self-balanced electrochemical model to explore the intricate interplay between coupled heat-moisture transmission and the corrosion process of steel reinforcement in concrete structures. The model accounts for the diffusion, convection, and adsorption mechanisms of chloride ions in both the cement paste and interfacial transition zone (ITZ) phases. Additionally, it incorporates the balance between gaseous and dissolved oxygen, along with oxygen consumption during cathodic reactions. This framework allows for the dynamic self-balancing of macrocell and microcell, thus offering a comprehensive understanding of the non-uniform corrosion process under various environmental factors including temperature, humidity, chloride ions, and oxygen. To validate the model, we employed comprehensive monitoring approaches, coupled with artificial climate-accelerated corrosion experiments. These were designed to record variables such as temperature, humidity, oxygen concentration, and corrosion current density under time-varying environmental conditions. Our results indicate that while temperature within the concrete remains relatively uniform, humidity exhibits a non-uniform distribution. This non-uniformity in humidity is particularly noticeable at concrete cover surface, leading to convection and accumulation effects of chloride ions. Moreover, we observe a strong correlation between oxygen concentration and relative humidity. Corrosion current density for steel rebar is found to be higher at edge regions compared to central regions, owing to varying distances from the external soaking solution. The insights gained from this research offer valuable theoretical guidance for the design, construction, and maintenance of reinforced concrete structures, particularly those exposed to marine environments.

Electrolyte accelerated corrosion technique for reinforced in concrete

Steel Corrosion In Concrete Using Electrolytic Acceleration

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Applicability Study on Accelerated Corrosion Methods of Steel Bars in Concrete Structure

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Research on Reinforcement Corrosion in Concrete by Using Electrochemical Frequency Modulation Technology

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Mechanical Performance of Corroded Steel Bars in Concrete

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Applicability of Accelerated Corrosion Method of Steel Bars in Cracked Concrete Structure

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Electrochemical Impedance Spectroscopy Characteristics of Corrosion Behavior of Rebar in Concrete

A Comparison Study on the Natural and Half-Soaking Galvanic Accelerated Corrosion of Reinforced Concrete Based on an Improved Electrochemical Model

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

Effect of Concrete Strength on Reinforcement Corrosion in Concrete

Electrochemical Study on Corrosion Resistance of Epoxy- Coated Reinforcing Steel in Bridge Concrete

The Study to the Corrosion of Reinforcing Steel in Concrete by Using Galvanostatic Pulse Technique

Repair Effect of Cracked Reinforced Concrete Based on Electrochemical Rehabilitation Technology