Abstract:Reinforced concrete is one of the most commonly used materials in the construction industry. The most and main causes of reinforcement corrosion in concrete structures are chloride attack and carbonation. Many studies have been carried out in this field so far, but due to the multitude of influencing factors and their complexity, different results have been obtained. In this study, reinforced concrete samples were prepared and investigated to monitor the threshold of chloride concentration for corrosion of SD345 carbon steel rebar using the electrochemical impedance spectroscopy (EIS) and half-cell potential (HCP) tests. A series of electrolyte solutions containing different NaCl contents, that is, 0, 1, 2 and 3 wt%, were used to simulate the chloride environment. Given that the HCP values are relatively low for carbon steel rebars, there are a high possibility for corrosion of all samples. By increasing the NaCl content in electrolyte solution, the current density values were increased from the early stages, indicating corrosion enhancement in the samples with increasing chloride ions in solution. The EIS results show that resistance of passive film gradually decreased by increasing the chloride concentration which shows that non-protective corrosion and porous products have been advanced on the surface of steel rebar. Furthermore, the EIS findings indicated an obviously increase of charge transfer resistance and a clearly reduction in the non-ideal interfacial capacitance after 16 weeks exposed to 2 wt% NaCl solution which can be attributed to the high degree of hydration and the efficiently refined the pore structure of the reinforced concretes. Scanning electron microscopy analysis confirmed the results obtained by electrochemical experiments.

Electrochemical Study on Corrosion Resistance of Epoxy- Coated Reinforcing Steel in Bridge Concrete

Study on Corrosion Behavior of Reinforcing Steel in Concrete Subjected to Chloride Contamination by EIS

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Electrochemical Impedance Spectroscopy Characteristics of Corrosion Behavior of Rebar in Concrete

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Application of Electrochemical Impedance Spectroscopy to Evaluate the Corrosion Behavior of 2304 Duplex Stainless Steel Reinforced Rebar in Concrete Exposed in Chloride-Rich Environment

Threshold Level of Chloride Ions for Corrosion of SD345 Carbon Steel Reinforcement in Concrete

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Electrochemical Studies on the Corrosion of Steel Bar in Concrete in Chloride Environment

Corrosion Performance of Reinforcing Steel in Concrete under Simultaneous Flexural Load and Chlorides Attack

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Study on the Corrosion Behavior of Reinforcing Steel by Electrochemical Techniques and Xps

Electrochemical Detection for the Corrosion of Reinforcing Steel in Concrete During Immersion and Drying Cycles

EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions

Electrochemical dielectric response of steel corrosion induced by chloride in simulated concrete pore solution

Electrochemical Changes of Pre-Corroded Steel Reinforced Concrete Due to Electrochemical Chloride Extraction

Corrosion Behavior of Reinforcing Steel in Simulated Concrete Pore Solutions: A Scanning Micro-Reference Electrode Study

Electrochemical and XPS study on effect of Cl-on corrosion behavior of reinforcing steel in simulated concrete pore solutions

Investigation of HRB335 steel Corrosion in Concrete in Chloride-Containing Sulfate Solution Using Electrochemical Method