Abstract:Quantitative visualization of the full-field stress and strain in porous structures is of significance to reveal the mechanism of the damage and failure of engineering materials. To quantitatively characterize the full-field stresses and strains, optical measurement methods, such as photoelasticity for determining the stress fields, moiré and digital image correlation (DIC) methods for measuring the strain fields, have been developed in previous works. However, it is challenging to combine these methods to measure stress and strain fields simultaneously because the speckles and gratings for strain measurement will disturb the interference fringes in the photoelasticity. In this study, a method incorporating photoelasticity and DIC techniques was developed to determine the stress and strain fields simultaneously in different porous structures which were fabricated by three-dimensional (3D) printed technique. The tested models were printed with a highly transparent, colourless material and the speckles on the front surface of the tested models were printed with a translucent, magenta material. Under compressive loads, the stress fields in these models were obtained based on the photoelastic patterns and the strain fields were determined by DIC method. The results indicate the proposed method can simultaneously determine the full-field stresses and strains and the comparison of the distribution of the principal stress and strain difference and the distribution of the shear stress and strain verified its good accuracy. In addition, the stress and strain distribution in different pore structures were compared and found that the optimal design of the pore distribution can greatly change the concentration of the stress and strain fields.

POLARIZED SPECKLE-PHOTOELASTICITY FOR 3-D STRESS ANALYSIS

Method to Analyze and Evaluate the Depth Profile of the Three Dimensional Residual Stresses State with X-ray

Research on Two Optical Methods for Aspheric Measurement

Quantification of Photoelastic Fringe Orders Using Polarized Light Camera and Continuous Loading

Integrated photoelasticity in a soft material: phase retardation, azimuthal angle and stress-optic coefficient

Light Transmission in Thermal Stress-Induced Birefringent Medium

Determination of the Stress and Strain Fields in Porous Structures by Photoelasticity and Digital Image Correlation Techniques

Determination of the Full-Field Stress and Displacement Using Photoelasticity and Sampling Moiré Method in a 3D-Printed Model

Photoelastic studies for composite dynamics

Investigation of Photoelastic Property and Stress Analysis for Optical Polyimide Membrane through Stress Birefringence Method

3D Imaging of Complex Specular Surfaces by Fusing Polarimetric and Deflectometric Information

Error analysis and correction equations for a real-time phase-shifting method using circular polariscope-based photoelasticity

Digital shifting photoelasticity with optical enlarged unwrapping technology for local stress measurement

Chromatic DIC-Assisted Fringe Projection Profilometry for Shape, Deformation, and Strain Measurement With Intensity-Chroma Space Analysis

Direct strain measurement method based on the correlation of defocused laser speckle pattern

Polarized shearing Moiré interferometry

Analytical Estimation of Stress-Induced Birefringence in Panda-Type Polarization-Maintaining Fibers

Simultaneous 3D measurement of deformation and its first derivative with speckle pattern interferometry and shearography

Photoelastic stress response of complex 3D-printed particle shapes

Full-field automated photoelasticity by fourier polarimetry with three wavelengths

Speckle Interferometry to Investigate Degradation Processes of Stressed Solid Materials