Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO3-x) nanocomposite sensors. Oxygen deficiency in WO3-x facilitates the reaction of hydrogen sulfide (H2S) gas with chemisorbed oxygen species (i.e., O2-, O-, and O2-) at low temperature. The oxygen/sulphur exchange reaction between CuO and H2S in the sensing process can achieve room temperature operation of gas sensors. After the WO3-x nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an n-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different x values. Among them, CuO(L)/W5O14 shows the highest sensitivity of 1575.7 to 10 ppm H2S at 99 °C and 171.5 to 10 ppm H2S at room temperature. Once WO3-x were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a p-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W18O49 displays the most sensitive response of 7.2 even toward trace amounts of H2S as low as 100 ppb. In addition, p-type CuO weakens the metal-like characteristics of W18O49 and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W18O49 composite is the best among the four CuO/WO3-x sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H2S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.

CO Gas Sensing Properties of Tungsten Oxide Nanowires Sensing Film

PREPARATION AND CARBON MONOXIDE SENSING PROPERTIES OF TUNGSTEN TRIOXIDE NANOWIRES

Study on Atmosphere Modification of Gas Sensing Sensor Based on Tungsten Oxide Thick Film

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Large-Scale Hydrothermal Synthesis of Tungsten Trioxide Nanowires and Their Gas Sensing Properties

Large-area alignment of tungsten oxide nanowires over flat and patterned substrates for room-temperature gas sensing

Fabrication of a Gas Sensor from Thin Films of Tungsten Oxide Nanoparticles and Their Use in Oil Refineries

Improving ZnO Thin Film with CuO Nanorods to Enhance the Application in Lower-Work-Temperature Carbon Monoxide Gas Sensing

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

Gas Sensing Characteristics of Nano-Structured Metal Oxides

Porous Cobalt Oxide Nanowires: Notable Improved Gas Sensing Performances

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO

Preparation of CuO Nanowires by Simple Thermal Oxidation and Their Gas-Sensing Property

Selective detection of trace carbon monoxide at room temperature based on CuO nanosheets exposed to (111) crystal facets

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO3-x Modified with CuO.

Preparation and morphology controlling of Co3O4 nanostructures and their gas-sensing properties

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Improved Sensing Properties of Thermal Conductivity-Type CO2 Gas Sensors by Loading Multi-Walled Carbon Nanotubes Into Nano-Al2O3 Powders

Preparation of Hexagonal Wo3 Nanowires and Nh3 Sensing Characteristics

Synthesis of graphitic carbon nitride nanosheets decorated spherical‐like nickel oxide composites for carbon monoxide gas‐sensing application

Preparation of tungsten-doped zinc oxide thin films by co-sputtering for micro-gas sensing devices