Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO3-x) nanocomposite sensors. Oxygen deficiency in WO3-x facilitates the reaction of hydrogen sulfide (H2S) gas with chemisorbed oxygen species (i.e., O2-, O-, and O2-) at low temperature. The oxygen/sulphur exchange reaction between CuO and H2S in the sensing process can achieve room temperature operation of gas sensors. After the WO3-x nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an n-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different x values. Among them, CuO(L)/W5O14 shows the highest sensitivity of 1575.7 to 10 ppm H2S at 99 °C and 171.5 to 10 ppm H2S at room temperature. Once WO3-x were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a p-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W18O49 displays the most sensitive response of 7.2 even toward trace amounts of H2S as low as 100 ppb. In addition, p-type CuO weakens the metal-like characteristics of W18O49 and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W18O49 composite is the best among the four CuO/WO3-x sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H2S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.

Preparation of CuO Nanowires by Simple Thermal Oxidation and Their Gas-Sensing Property

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Fabrication of a Single CuO Nanowire-based Gas Sensor Working at Room Temperatur

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO

Hydrothermal Synthesis and Annealing Effect on the Properties of Gas-Sensitive Copper Oxide Nanowires

Conductometric chemical sensor based on individual CuO nanowires.

Controlled oxidation of Cu particles by H2O2 to form Cu/CuO nanostructure with enhanced gas sensing performance

Metal Oxide Nanowires for Gas Sensor Applications

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

A single CuO/Cu2O/Cu micro-wire covered by a nano-wire network as gas sensor for the detection of battery hazards.

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Improving ZnO Thin Film with CuO Nanorods to Enhance the Application in Lower-Work-Temperature Carbon Monoxide Gas Sensing

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO3-x Modified with CuO.

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Controllable Synthesis of Heterostructured CuO–NiO Nanotubes and Their Synergistic Effect for Glycol Gas Sensing

Modulating Gas Sensing Properties of CuO Nanowires Through Creation of Discrete Nanosized P-N Junctions on Their Surfaces.

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

Synthesis and gas sensing properties of NiO/ZnO heterostructured nanowires

Selective detection of trace carbon monoxide at room temperature based on CuO nanosheets exposed to (111) crystal facets

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection