Abstract:Conventional gas-sensing materials for detecting trace NO2 gas are suffering from limitations such as low selectivity, high operation temperature and an agglomerated tendency during synthesis. In this work, uniform CuO nanoflakes modified with rGO nanosheets (CuO/rGO) were synthesized via an ultra-low-cost hydrothermal process with a thermal treatment. The gas sensor based on the as-synthesized CuO/rGO was fabricated by spincoated method and applied to detect ppb-level NO2 gas at room temperature (23?C). Remarkably, the CuO/rGObased sensor maintained an ultrahigh response behavior of approximately 400.8 % towards 5 ppm NO2 gas with ultrafast response time of 6.8 s at 23?C, and the limit of detection was down to 50 ppb (S = 20.6 %). In addition, the gas sensor had outstanding consistency, reliable repeatability, and long-term stability (30 days). The improved gas-sensing response was attributed to the synergetic effects of CuO and rGO. Specifically, the porous flake-like nanostructures of CuO and high surface areas of CuO/rGO may provide additional active adsorption sites for NO2 gas and accelerate the redox reaction on the surface of CuO/rGO, leading to the ultrahigh response. On the other hand, the rGO nanosheets with excellent transport capability may serve as highly conductive channels to accelerate carrier transfer, which dramatically reduced the response and recovery time. Furthermore, abundant surface defects of CuO/rGO were also conducive to surface reactions in the gas-sensing process. Undoubtedly, the scientific study of the present work will promote potential applications of ppb-level NO2 detection at room temperature.

Selective detection of trace carbon monoxide at room temperature based on CuO nanosheets exposed to (111) crystal facets

Simple Synthesis of Cuo Nanosheets with Exposed (111) Active Crystal Facets and Oxygen Defects for Co Detection at Room Temperature

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Co<sub>3</sub>O<sub>4</sub> Nanosheets Decorated with In<sub>2</sub>O<sub>3 </sub>Nanocubes with Exposed {001} Facets for ppb-Level CO Sensing

Co3O4 Nanosheets Decorated with In2O3 Nanocubes with Exposed {001} Facets for Ppb-Level CO Sensing

Carbon Monoxide Gas Sensing at Room Temperature Using Copper Oxide-Decorated Graphene Hybrid Nanocomposite Prepared by Layer-by-layer Self-Assembly

Rapid and Stable Detection of Carbon Monoxide in Changing Humidity Atmospheres Using Clustered In2O3/CuO Nanospheres

A carbon monoxide sensor based on single-walled carbon nanotubes doped with copper chloride

CuO surface doped In2O3/CeO2 nanofibers for ppb-ppm level carbon monoxide gas detection in low-temperature

Controlled Synthesis of Pt and Co3O4 Dual-Functionalized In2O3 Nanoassemblies for Room Temperature Detection of Carbon Monoxide

Carbon Monoxide (CO) Sensor Based on Au Nanoparticles Embedded in a CuO Matrix by HR-LSPR Spectroscopy at Room Temperature

A CuO/TiO2 Heterojunction Based CO Sensor with High Response and Selectivity

ZnO Based Ultrasensitive CO Chemiresistive Gas Sensor

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Room-temperature Highly Sensitive CO Gas Sensor Based on Ag-loaded Zinc Oxide/molybdenum Disulfide Ternary Nanocomposite and Its Sensing Properties

A Room-Temperature NO2 Gas Sensor Based on CuO Nanoflakes Modified with Rgo Nanosheets

Highly sensitive hybrid nanofiber-based room-temperature CO sensors: Experiments and density functional theory simulations

Ultrathin SnO2 Nanosheets with Dominant High-Energy {001} Facets for Low Temperature Formaldehyde Gas Sensor

Ultrafast CO Sensor Based on Flame-annealed Porous CeO2 Nanosheets for Environmental Application

Improving ZnO Thin Film with CuO Nanorods to Enhance the Application in Lower-Work-Temperature Carbon Monoxide Gas Sensing