Abstract:In this work, three-dimensional (3D) hierarchical In2O3@SnO2 core-shell nanofiber (In2O3@SnO2) was designed and successfully prepared via a facile electrospinning and further hydrothermal methods. Vertically aligned SnO2 nanosheets uniformly grown on the outside surface of In2O3 nanofibers were clearly observed by field emission scanning electron microscopy. Besides, hierarchical core-shell nanostructure of In2O3@SnO2 was characterized by elemental maps using scanning transmission electron microscopy. The formaldehyde (HCHO) sensing performances of pure In2O3 nanofibers, SnO2 nanosheets, and In2O3@SnO2 core-shell nanocomposite were compared, and the In2O3@SnO2 nanocomposite possessed highest response value, fast response/recovery speed, best selectivity, and lowest HCHO detection limit. Specifically, the response value (R-a/R-g) of the In2O3@SnO2 nanocomposite reached 180.1 toward 100 ppm of HCHO gas, which was near 9 and 6 times higher than that of the pure In2O3 nanofibers (R-a/R-g = 19.7) and pure SnO2 nanosheets (R-a/R-g = 33.2), respectively. In addition, the gas sensor showed instantaneous response/recovery time (3/3.6 s) toward 100 ppm of HCHO at the optimal operation temperature of 120 degrees C. More importantly, the detection limit toward HCHO gas was as low as 10 ppb (R-a/R-g = 1.9), which could be used for trace HCHO gas detection. The excellent sensing properties of the In2O3@SnO2 were attributed to the synergistic effect of large specific surface areas of SnO2 nanosheet arrays, abundant adsorbed oxygen species on the surface, unique electron transformation between core-shell heterogeneous materials, and long electronic transmission channel of SnO2 transition layer. This work provides an efficient route for the preparation of novel hierarchical sensitive materials.

Ultrathin SnO2 Nanosheets with Dominant High-Energy {001} Facets for Low Temperature Formaldehyde Gas Sensor

SnO2 mesoporous nanoparticle-based gas sensor for highly sensitive and low concentration formaldehyde detection

Engineering of in-plane SnO2-Sn3O4 hierarchical nanoflower heterojunctions for enhanced formaldehyde sensing

Facile Hydrothermal Synthesis of SnO2 Nanoflowers for Low-Concentration Formaldehyde Detection

Sm-doped SnO2 nanoparticles synthesized via solvothermal method as a high-performance formaldehyde sensing material for gas sensors

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Hydrothermal Synthesis of SnO2 with Different Morphologies as Sensing Materials for HCHO Detection

Synthesis of Mesoporous Ag2O/SnO2 Nanospheres for Selective Sensing of Formaldehyde at a Low Working Temperature

Hierarchical In2O3@SnO2 Core-Shell Nanofiber for High Efficiency Formaldehyde Detection.

In Situ Fabrication of SnS2/SnO2 Heterostructures for Boosting Formaldehyde−Sensing Properties at Room Temperature

Controlled preparation and gas sensitive properties of two-dimensional and cubic structure ZnSnO3

Humidity-tolerant sensing performance of NiO/SnO2 material for quick formaldehyde detection

High sensitivity and fast response sensor for formaldehyde based on In2O3/Sn2O3 heterojunction

Hydrothermal and heat-treated synthesis of SnS nanostructures for VOCs sensing

Enhanced gas sensing properties for formaldehyde based on ZnO/Zn2SnO4 composites from one-step hydrothermal synthesis

Enhanced formaldehyde sensitivity of two-dimensional mesoporous SnO2 by nitrogen-doped graphene quantum dots

Nanocomposites of pre-oxidized Ti3C2Tx MXene and SnO2 nanosheets for highly sensitive and stable formaldehyde gas sensor

Ultra-fast and highly selective room-temperature formaldehyde gas sensing of Pt-decorated MoO3 nanobelts

SnO 2 Nanoparticles Derived from Metal–Organic Precursors as an Acetaldehyde Gas Sensor with ppb-Level Detection Limit

Synthesis of porous flower-like SnO2/CdSnO3 microstructures with excellent sensing performances for volatile organic compounds

Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles