Abstract:In this study, a strategy to prepare CuO/Cu2O/Cu microwires which is fully covered by a nanowire network using a simple thermal oxidation process is developed. The CuO/Cu2O/Cu-microwires are fixed on Au/Cr pads with Cu microparticles. After thermal annealing at 425 °C, these CuO/Cu2O/Cu microwires are used as room-temperature 2-propanol sensors. These sensors show different dominating gas responses with operating temperatures, for example, higher sensitivity to ethanol at 175 oC, higher sensitivity to 2-propanol at room temperature and 225 oC, and higher sensitivity to hydrogen gas at ~ 300 oC, respectively. In this context, we propose the sensing mechanism of this 3-in-1 sensor based on CuO/Cu2O/Cu. XRD studies reveal that the annealing time during oxidation affects the chemical appearance of the sensor, while the intensity of reflections proves that for samples oxidized at 425 ºC for 1 h the dominating phase is Cu2O, whereas upon further rising the annealing duration up to 5 h, the CuO phase becomes dominant. The crystal structure of the Cu2O-shell/Cu-core and the CuO-NWs networks on the surface were confirmed with TEM, HRTEM, and SAED, where (HR)TEM micrographs reveal the monoclinic CuO phase. DFT calculations brings valuable inputs to the interactions of the different gas molecules with the most stable topsurface of CuO, revealing strong binding, electronic band gap changes and charge transfer dueto the gas molecule interactions with the topsurface. This research shows the importance of the non-planar CuO/Cu2O layered hetero-structure as a bright nanomaterial for the detection of various gases, controlled by the working temperature, and the insight presented here will be of significant value in the fabrication of new p-type sensing devices through simple nanotechnology.

Controlled oxidation of Cu particles by H2O2 to form Cu/CuO nanostructure with enhanced gas sensing performance

Metal‐Organic Frameworks‐Derived Porous In2O3 Hollow Nanorod for High‐Performance Ethanol Gas Sensor

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Boosting Ethylene Glycol Sensing with Dendritic Hierarchical Cuo/Co3o4 Heterojunction Nanowire

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Self-oxidized AgCu Nano-Foam with Unique Phase Structure for Ethanol Sensors Breaking Through the Trade-off Between Sensitivity and Upper Linear Limit

CuO-based gas sensor decorated by polyoxometalates electron acceptors: From constructing heterostructure to improved sensitivity and fast response for ethanol detection

Preparation of CuO Nanowires by Simple Thermal Oxidation and Their Gas-Sensing Property

Three-dimensional Hierarchical CuO Gas Sensor Modified by Au Nanoparticles

Controllable Synthesis of Heterostructured CuO–NiO Nanotubes and Their Synergistic Effect for Glycol Gas Sensing

Size-Controlled Au Nanoparticles Incorporating Mesoporous ZnO for Sensitive Ethanol Sensing

Highly sensitive ethanol gas sensor based on CuO/ZnSnO3 heterojunction composites

P-n junctions based on CuO-decorated ZnO nanowires for ethanol sensing application

Controllable Synthesis of Crescent-Shaped Porous NiO Nanoplates for Conductometric Ethanol Gas Sensors

The highly sensitive ethanol sensor based on nanocomposites of ZnO in-situ grown on 2D Ti3C2Tx nanosheet

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

Synthesis of Co3O4/Ta2O5 Heterostructure Hollow Nanospheres for Enhanced Room Temperature Ethanol Gas Sensor

MOF-derived In2O3 nanotubes/Cr2O3 nanoparticles composites for superior ethanol gas-sensing performance at room temperature

Coaxial electrospinning Fe2O3@Co3O4 double-shelled nanotubes for enhanced ethanol sensing performance in a wide humidity range

Boosting Ethylene Glycol Sensing Performance with Dendritic Hierarchical CuO/Co 3 O 4 Heterojunction Nanowire

A single CuO/Cu2O/Cu micro-wire covered by a nano-wire network as gas sensor for the detection of battery hazards.