Abstract:Improving the critical heat flux (CHF) and avoiding dry out downstream are the keys to enhance the two-phase cooling performance of microchannel heat sinks. In this work, a novel type of bidirectional counter-flow (BCF) microchannels with 600 mu m depth and 300 mu m width, giving a hydraulic diameter of 400 mu m , is fabricated in an oxygen-free copper base. Flow boiling experiments are conducted in bidi-rectional counter-flow microchannels and conventional unidirectional parallel-flow (UPF) microchannels, with the deionized water being used as the working fluid. Cases under six mass fluxes ranging from 118 kg/m(2).s to 370 kg/m(2).s and three inlet subcoolings of 30 degrees C, 50 degrees C, and 70 degrees C are tested. Two-phase flow behaviors in microchannels are simultaneously captured by a high-speed camera. It is found that, unlike conventional UPF microchannels, the location for the onset of nucleate boiling (ONB) in BCF mi-crochannels is moved from downstream to the middle region. The downstream dry-out, which is usually occurred in UPF microchannels, can be well avoided in BCF microchannels due to the substantial feeding of liquid in adjacent microchannels. The CHF in BCF microchannels can be increased by 33.8-57.2% com-pared with the conventional UPF microchannels. Under the combined effect of expanded nucleate boiling region and shortened subcooling region, the average heat transfer coefficient (HTC) in BCF microchannels can be increased by 36.6%-56.7%. More interestingly, the improvement of heat transfer performance is found to be accompanied by a significant reduction in pressure drop for BCF microchannels in all the experiment cases. In addition, two-phase instabilities in terms of wall temperature and pressure drop oscillations can be significantly suppressed by using BCF microchannels instead of the conventional UPF microchannels. This study proposes a more efficient microchannel heat sink design scheme to deal with the microelectronic cooling challenges. (c) 2022 Elsevier Ltd. All rights reserved.

Experiment Investigation on a Honeycomb Micro-channel Based Cooling System

Experimental Research on A Honeycomb Microchannel Cooling System

Experimental Study On A Honeycomb Micro Channel Cooling System

A honeycomb microchannel cooling system for microelectronics cooling

A Honeycomb Micro Channel Cooling System For Electronics Cooling

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Experimental Study on the Multilayered Honeycomb Microchannel Heatsink Design Based on the Flow Disruption

Thermal Performance of the Multilayered Honeycomb Microchannel Heat Sink

Experimental Investigation of Heat Transfer Performance for a Novel Microchannel Heat Sink

Cooling Behavior In A Novel Heat Sink Based On Multilayer Staggered Honeycomb Structure

Experimental Study on Cooling Performance of a Hybrid Microchannel and Jet Impingement Heat Sink

Hybrid Mini/Micro-Channel Heat Sink Using Liquid Metal and Water As Coolants

Experimental Study on a Tree-Shaped Microchannel Network Heat Sink for MicrOeIectronic Cooling

A bio-inspired fractal microchannel heat sink with secondary modified structure and sub-total-sub fluid transmission mode for high heat flux and energy-saving heat dissipation

Experimental and Numerical Study on the Performances of Mini-Channel Heat Sinks

Micro-Channel Heat Sink: A Review

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

Experimental and Numerical Investigation of Thermal Performance of S-shaped Manifold Microchannel Heat Sinks

Experiment Investigation on Flow Boiling Heat Transfer in a Bidirectional Counter-Flow Microchannel Heat Sink

Study on the performance of a miniscale channel heat sink with Y-shaped unit channels based on entransy analysis

A Microchannel Heat Sink with Unitary Circular Flow and Short Distance Heat Transfer Mode: Design and Analysis