Abstract:h-BN-ZrO2-SiC multiphase ceramics were prepared rapidly by spark plasma sintering (SPS) with h-BN, ZrO2 and SiC powders as raw materials and 8% (Al2O3+Y2O3) as sintering aids. The effects of nano SiC content on the densification, microstructure and mechanical properties of h-BN-ZrO2-SiC multiphase ceramics were investigated. The results show that the addition of nano SiC particles can effectively promote the sintering and increase density and mechanical properties of the sintered samples at a low sintering temperature. The flexural strength, fracture toughness and elastic modulus all increase with the content increase of nano SiC, especially, the increment of the elastic modulus is obvious. The comparison of all results shows that the sample with the SiC content of 25% has optimal mechanical properties, and the flexural strength, fracture toughness and elastic modulus are 268.4 MPa, 3.24 MPa.m(1/2) and 115 GPa, respectively. It is mainly because the nano SiC particles can better play a gap filling, dispersion strengthening and grain boundary pinning effect than ZrO2, which are beneficial to improve the bonding strength between the phases and reduce the residual stress due to thermal mismatch. As a result, more fracture energy is absorbed during the crack propagation process, and the flexural strength and fracture toughness increase.

Synthesis and Mechanical Properties of Sm2Zr2O7-ZrB2/SiC Composites

Microstructures and mechanical properties of reactive spark plasma-sintered ZrB2–SiC–MoSi2 composites

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Microstructure and mechanical properties of SiC composite ceramics modified by (TixZr1–x)B2 solid solution

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

SPS densification and ablative performance of ZrB2–SiC–ZrC composites derived from the ternary powders by sol-gel

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

SPS Sintering Behavior and Microstructure of ZrB2-SiCpl Composite Ceramics

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Microstructure and Mechanical Properties of Ti3sic2/3y-Tzp Composites by Spark Plasma Sintering

Correlation between phase content and mechanical properties of SiCw- ZTA composites sintered by SPS

Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Preparation And Mechanical Properties Of Zirconium Diboride Matrix Composites Reinforced By Silicon Carbon Platelets

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering