Abstract:Journal of Building Physics, Ahead of Print. The purpose of this paper is to obtain the optimal filling scheme for improving thermal performance of the prefabricated sintered hollow wallboard considering both summer and winter conditions, and achieve self-insulation. Effects of different measures of installing separated paperboard, filling Phase Change Material (PCM) and Thermal Insulation Material (TIM) in the prefabricated wallboard are studied by experiment and COMSOL numerical methods. Firstly, the paperboard is installed in the middle of all cavities to reduce convection heat transfer. The experiment results show that average peak heat flux of the exterior surface in the three test days decreases by 5.25 W/m2 after installing the separated paperboard. Secondly, different filling positions (inner, middle, and outer cavities) and different phase change temperatures (23°C–27°C, 28°C–32°C, and 33°C–37°C) are discussed by COMSOL numerical model in summer condition, and the model is verified by the experimental data. Results show that better scheme is PCM (28°C–32°C) filled in the middle cavities of the prefabricated wallboard, which can increase the delay time and the attenuation factor of interior surface temperature by 2.92 h and 13.66, respectively, compared with no filling scheme. Finally, based on the optimal PCM filling scheme, schemes filled with TIM in different position of other cavities are also analyzed to further improve thermal performance of the prefabricated wallboard throughout the year. Results show that PCM (28°C–32°C) filled in the middle cavities and TIM filled in inner cavities has better effect in summer, and TIM filled in both inner and outer cavities is much better in winter. The evaluation indicators of the two better schemes in summer and winter are compared comprehensively, and the difference is not obvious. The results can provide optimal filling scheme and theoretical guidance for improving thermal performance of the prefabricated sintered hollow wallboard in hot summer and cold winter climate.

Influence from the Thickness of the Gypsum Based and the Transition Temperature to the Wall Thermal Performance in the Hot Summer and Cold Winter Zone

Optimum Insulation Thickness of External Walls by Integrating Indoor Moisture Buffering Effect: a Case Study in the Hot-Summer-cold-winter Zone of China

The Energy Saving Effect of Different Wall Insulation Configurations with the Intermittent and Compartmental Heating Method

Study on Energy Saving Effect of Heat-Reflective Insulation Coating on Envelopes in the Hot Summer and Cold Winter Zone

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Heat and Moisture Transfer in Wall-to-floor Thermal Bridges and Its Influence on Thermal Performance

The Moisture Distribution in Wall-to-floor Thermal Bridges and Its Influence on Mould Growth

Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard

Research on improving thermal performance of prefabricated sintered hollow wallboard with optimizing filling materials

Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)

Energy, Economic and Environmental (3E) Analysis of Residential Building Walls Enhanced with Phase Change Materials

Analysis of the Applicability of a Phase-Change Energy Storage Wall for Public Buildings in Hot Summer and Cold Winter Climate Zones

Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves

Analysis of thermal characteristics and thermal storage performance of energy-saving phase change thermal storage materials in buildings

Investigation on Mechanical Properties and Temperature Control Efficiency of Novel Load-Bearing and Heat-Storing Metastructure Walls in Hot Summer-Cold Winter Regions

Thermal insulation performance of buildings with phase-change energy-storage wall structures

An exploration on the performance of using phase change humidity control material wallboards in office buildings

SIMULATION AND EVALUATION ON THE THERMAL PERFORMANCE OF PCM WALLBOARD ROOMS LOCATED IN VARIOUS CLIMATE REGIONS OF CHINA IN SUMMER

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones