Abstract:The global demand for renewable energy sources has intensified the quest for innovative and inexpensive solar cell technologies. Employing thin crystalline silicon (c-Si) is of great interest in these advancements. Here, integration of organic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and nanostructured thin-flexible Si wafer (~50 μm) is investigated to harness their synergies in fabricating mechanically flexible hybrid heterojunction solar cells (HHSCs). Flexible Si wafers are prepared through alkali etching followed by SiNW on single side of the thin wafers using single-step silver (Ag)-assisted chemical etching (Ag-ACE) process at room temperature. The SiNW incorporated flexible solar cells produced an impressive power conversion efficiency (PCE: 9.0%) even in the simple design owing to enhanced light absorption in broad spectral range. It is found that SiNW length and polymer layer thickness play critical role in defining the trade-off among the optoelectronic, junction and solar cell parameters. The SiNW of 170±20 nm length and PEDOT:PSS of 100±10 nm layer is the optimal combination for the best solar cell parameters. The enhanced light trapping and charge generation rate are also confirmed by finite-difference time-domain (FDTD) simulation. Detailed analysis of light trapping, junction properties, surface passivation, device performance parameters and their co-relation have been discussed. Our study demonstrates the SiNW-incorporated flexible and efficient PEDOT:PSS/n-Si HHSCs, which can lead to not only the advancement of low-cost photovoltaics but also offer potential for diverse applications, from portable electronics to wearable technology.

A New Approach to Fabricating Silicon Nanowire/Poly(3, 4-Ethylenedioxythiophene) Hybrid Heterojunction Solar Cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Si/Pedot:Pss Core/Shell Nanowire Arrays for Efficient Hybrid Solar Cells

Structure Dependence In Hybrid Si Nanowire/Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Solar Cells: Understanding Photovoltaic Conversion In Nanowire Radial Junctions

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

GaAs nanowire/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid solar cells

Opto-electric investigation for Si/organic heterojunction single-nanowire solar cells

High Efficiency Organic/Silicon-Nanowire Hybrid Solar Cells: Significance of Strong Inversion Layer

Substantial Improvement of Short Wavelength Response in n-SiNW/PEDOT:PSS Solar Cell

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Characteristics of A Silicon Nanowires/Pedot:Pss Heterojunction and Its Effect on the Solar Cell Performance

Fabrication of an Efficient Planar Organic-Silicon Hybrid Solar Cell with a 150 Nm Thick Film of PEDOT: PSS

Phosphorus and Selenium Co‐Doped WO3 Nanoparticles for Interface Modification and Photovoltaic Properties Enhancement of Monolayer Planar Silicon/PEDOT:PSS Hybrid Solar Cells

Hybrid Tapered Silicon Nanowire/pedot:Pss Solar Cells

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer via the Introduction of ITO Nanoparticles and Its Application in Crystalline Silicon/Organic Heterojunction Solar Cells

FABRICATION OF SILICON NANOWIRE (SiNW) ARRAYS AND APPLICATION IN SOLAR CELL

High-Efficiency Si-Organic Hybrid Solar Cells Using Au@Mos2 Doped Pedot:Pss

High-Efficiency Silicon/Organic Heterojunction Solar Cells with Improved Junction Quality and Interface Passivation

A one-step template-free approach to achieve tapered silicon nanowire arrays with controllable filling ratios for solar cell applications