Abstract:In this work, using the methods of X-ray phase analysis, transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy, the features of the impact of annealing in air within the temperature range of t = 200÷÷550 °C on the morphology, elemental and phase composition, chemical state and structure of primary particles of nanopowders obtained by grinding natural diamond and the method of detonation synthesis are studied. It is shown that heat treatment in air at given values of temperature and heating time does not affect the elemental composition and atomic structure of primary particles of nanopowders obtained both by the methods of detonation synthesis (DND) and natural diamond grinding (PND). Using XPS, Raman spectroscopy, and transmission electron microscopy, it has been found that annealing in air within the temperature range of 400–550 °C results in the effective removal of amorphous and graphite-like carbon atoms in the sp2- and sp3-states from diamond nanopowders by oxidation with atmospheric oxygen. In the original DND nanopowder, containing about 33.2 % of non-diamond carbon atoms of the total number of carbon atoms, after annealing for 5 h at a temperature of 550 °C, the relative number of nondiamond carbon atoms in the sp2-state decreased to ~21.4 %. In this case, the increase in the relative number of carbon atoms in the sp3-state (in the lattice of the diamond core) and in the composition of oxygen-containing functional groups ranged from ~39.8 % to ~46.5 % and from ~27 % to ~32.1 %, respectively. In the PND nanopowder, which prior to annealing contains about 10.6 % of non-diamond carbon atoms in the sp2-state of the total number of carbon atoms, after annealing under the same conditions as the DND nanopowder, their relative number decreased to 7.1 %. The relative number of carbon atoms in the sp3-state increased from 72.9 % to 82.1 %, and the proportion of carbon atoms in the composition of oxygen-containing functional groups also slightly increased from 10.2 % to 10.8 %. It is demonstrated that the annealing of PND and DND nanopowders in air leads to a change in their color, they become lighter as a result of oxidation of non-diamond carbon by atmospheric oxygen. The maximum effect is observed at a temperature of 550 °C and an annealing time of 5 h. In this case, the weight loss of PND and DND nanopowders after annealing was 5.37 % and 21.09 %, respectively. The significant weight loss of DND nanopowder compared to PND is primarily caused by the high content of non-diamond carbon in the initial state and the high surface energy of primary particles due to their small size.

Effect of Heat Treatment on the Properties of Nano-Diamond under Oxygen and Argon Ambient

Effect of Annealing on the Properties of Nano-diamond under Argon Ambient

Air-thermal oxidation of diamond nanopowders obtained by the methods of mechanical grinding and detonation synthesis

Effects of Heat Treatment in Air Environment on the Dispersivity of Nanodiamond

Graphitization of Nanodiamond Powder Annealed in Argon Ambient

Study on Dispersion of Nano-Diamond During the Heat Treatment Process

Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface

Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond

Effects of annealing and oxidizing acid treatment on quality of diamond film fabricated by chemical vapor deposition method

Surface Characterization on Graphitization of Nanodiamond Powder Annealed in Nitrogen Ambient

Heat Treatment During Preparation of Nano-zirconia Powders by the Liquid-phase Process

Insights into the surface oxidation modification mechanism of nano-diamond: An atomistic understanding from ReaxFF simulations

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of 2D Nanostructured Au/NiFe System

Effects of Heat-Treatment Temperature on Preparation of the Sol-Gel-Derived Ag/TiO2 Films

Graphitization of Diamond Powders of Different Sizes at High Pressure–high Temperature

Effect of Heat Treatment on Microstructure and Thermophysical Properties of Diamond/2024 Al Composites

Effects of High Pressure and High Temperature Annealing on the Characteristics of HPHT Diamonds with High Nitrogen Content

Influence of thermal oxidation on as-synthesized detonation nanodiamond

Graphitization of CVD diamond grain boundaries during transient heat treatment

The Roles of Hydrogen in the Diamond/Amorphous Carbon Phase Transitions of Oxygen Ion Implanted Ultrananocrystalline Diamond Films at Different Annealing Temperatures

Study Of The Stability Of N-Diamond