Abstract:In this work, using the methods of X-ray phase analysis, transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy, the features of the impact of annealing in air within the temperature range of t = 200÷÷550 °C on the morphology, elemental and phase composition, chemical state and structure of primary particles of nanopowders obtained by grinding natural diamond and the method of detonation synthesis are studied. It is shown that heat treatment in air at given values of temperature and heating time does not affect the elemental composition and atomic structure of primary particles of nanopowders obtained both by the methods of detonation synthesis (DND) and natural diamond grinding (PND). Using XPS, Raman spectroscopy, and transmission electron microscopy, it has been found that annealing in air within the temperature range of 400–550 °C results in the effective removal of amorphous and graphite-like carbon atoms in the sp2- and sp3-states from diamond nanopowders by oxidation with atmospheric oxygen. In the original DND nanopowder, containing about 33.2 % of non-diamond carbon atoms of the total number of carbon atoms, after annealing for 5 h at a temperature of 550 °C, the relative number of nondiamond carbon atoms in the sp2-state decreased to ~21.4 %. In this case, the increase in the relative number of carbon atoms in the sp3-state (in the lattice of the diamond core) and in the composition of oxygen-containing functional groups ranged from ~39.8 % to ~46.5 % and from ~27 % to ~32.1 %, respectively. In the PND nanopowder, which prior to annealing contains about 10.6 % of non-diamond carbon atoms in the sp2-state of the total number of carbon atoms, after annealing under the same conditions as the DND nanopowder, their relative number decreased to 7.1 %. The relative number of carbon atoms in the sp3-state increased from 72.9 % to 82.1 %, and the proportion of carbon atoms in the composition of oxygen-containing functional groups also slightly increased from 10.2 % to 10.8 %. It is demonstrated that the annealing of PND and DND nanopowders in air leads to a change in their color, they become lighter as a result of oxidation of non-diamond carbon by atmospheric oxygen. The maximum effect is observed at a temperature of 550 °C and an annealing time of 5 h. In this case, the weight loss of PND and DND nanopowders after annealing was 5.37 % and 21.09 %, respectively. The significant weight loss of DND nanopowder compared to PND is primarily caused by the high content of non-diamond carbon in the initial state and the high surface energy of primary particles due to their small size.

Effect of Annealing on the Properties of Nano-diamond under Argon Ambient

Effect of Heat Treatment on the Properties of Nano-Diamond under Oxygen and Argon Ambient

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Air-thermal oxidation of diamond nanopowders obtained by the methods of mechanical grinding and detonation synthesis

Effects of Annealing Treatment on Microstructure and Electrochemical Performances of Co-free MlNi4.0Al0.3Si0.1Fe0.6 Hydrogen Storage Alloy

Effects of Post Annealing Treatments on the Interfacial Chemical Properties and Band Alignment of AlN/Si Structure Prepared by Atomic Layer Deposition

Annealing Effect On The Microstructure Modification And Tribological Properties Of Amorphous Carbon Nitride Films

The Stability of Nitrogen-Containing Amorphous Carbon Films after Annealing at Moderate Temperatures

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Effects of Annealing at Ar Ambient on the Physical Properties of Zn0.66Co0.34O Thin Film

Effect of annealing temperature on phase transition and optical property of titanate nanotubes prepared by ion exchange approach

Effect of annealing heat treatment on an atomized AB2 hydrogen storage alloy

ANNEALING TEMPERATURE EFFECT ON THE FIELD EMISSION PROPERTIES OF CARBON NANOTUBE FILMS

Effects of Annealing Treatment on Structure and Hydrogen Storage Properties of Melt-Spun LaNi_4.25 Al_0.75 Alloy

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of 2D Nanostructured Au/NiFe System

Dependence of structures and properties of carbon nanotube fibers on heating treatment

Effect of annealing treatment on the microstructure and mechanical properties of bulk nanostructured Ti/AZ61 composites prepared by hot pressing

The effect of high-temperature annealing on the structure and electrical properties of well-aligned carbon nanotubes

New Insights into the Reactivity of Detonation Nanodiamonds during the First Stages of Graphitization