Abstract:Cast iron is widely used as a grinding tool material in the field of ultra precision manufacturing. To explore the friction and wear properties of cast iron materials under magnetic-mechanical coupling conditions, theoretical research was conducted to reveal the wear mechanism of cast iron materials. A self-developed free abrasive line contact tribometer was used to study the evolution law of different process parameters on the friction and wear properties, surface roughness, and surface morphology of cast iron. The experimental results reveal that, under the magnetic field conditions, the mean value of friction coefficient is less than 0.218, the wear capacity of cast iron rings is less than 42 mg, and the surface roughness value Ra is less than 0.139 μm, additionally, the friction coefficient, wear capacity, and roughness values are all lower than those under no magnetic conditions. For cast iron materials, the surface roughness value Ra ranges from 0.094 to 0.253 μm after the experiment, it is negatively correlated with relative sliding ratio, load, abrasive particle size, and concentration, while is positively correlated with magnetic induction intensity; The friction coefficient is negatively correlated with relative sliding ratio and magnetic induction intensity in the range of 0.051 to 0.268, and positively correlated with abrasive particle size and concentration. With the load increasing, the friction coefficient first decreases and then increases; The wear capacity of cast iron ring is within the range of 8 to 140 mg. It is negatively correlated with magnetic induction intensity, and positively correlated with relative sliding ratio, load, abrasive particle size, and abrasive concentration. This study provides support for the theoretical research of cast iron as a grinding tool material and provides reference for the rational application of cast iron materials in the field of ultra precision manufacturing.

An investigation of the abrasive wear behavior of ductile cast iron

Analysis on Wear Properties and Impact Factors for Si3N4 Ceramic Mated with Chilled Cast Iron

The investigation on friction and wear properties of cast iron matrix surface compact vanadium carbide layer

Influence of Boron on Microstructure and Mechani cal Properties of Abrasive Wear Resistant Ductile Cast Iron

Study of Abrasive Wear Resistant of WC Particle Reinforced Chromium White Cast Irons Matrix Composite

Abrasive wear behavior and mechanism of high chromium cast iron

Effect of In-Situ (ti&w)c Multiphase Particles on Three-Body Abrasive Wear of High Chromium Cast Iron

Wear behavior of bainite ductile cast iron under impact load

Study on A New-Type Wear-Resistant White Cast Iron

Investigates of Three-body Abrasive Wear Behavior of WC Particles Reinforced Chromium Family White Cast Irons Composites

Mechanical and tribological behavior of dual-phase ductile iron with different martensite amounts

Effect of Graphitized Cast Irons Hardness on Wear of Ceramics

Effect of Interaction Between Cementite and Pearlite on Two-Body Abrasive Wear Behaviors in White Cast Iron

Two-Body Abrasion Behaviors Characterization of White Cast Iron with Various Chromium Concentrations

Unlubricated Sliding Wear Mechanism of Fine Ceramics Al2O3 and ZrO2 Against High Chromium Cast Iron

Corrosion Wear Behavior of Martensitic Ductile Iron

Three-body Abrasive Wear Resistance of Iron Matrix Composites Reinforced with Ceramic Particles

Mechanisms of Carbide and Matrix of 28Cr Cast Iron During Erosion-Wear Process

Study on the Friction and Wear Properties of Cast Iron Under Magnetic-Mechanical Coupling Conditions

Effect of impact on wear resistance of high chromium cast iron and austenitic stainless steel

Three-Body Abrasive Wear Behavior of Iron Matrix Composite Reinforced with Cemented Carbide Particles