Abstract:Cast iron is widely used as a grinding tool material in the field of ultra precision manufacturing. To explore the friction and wear properties of cast iron materials under magnetic-mechanical coupling conditions, theoretical research was conducted to reveal the wear mechanism of cast iron materials. A self-developed free abrasive line contact tribometer was used to study the evolution law of different process parameters on the friction and wear properties, surface roughness, and surface morphology of cast iron. The experimental results reveal that, under the magnetic field conditions, the mean value of friction coefficient is less than 0.218, the wear capacity of cast iron rings is less than 42 mg, and the surface roughness value Ra is less than 0.139 μm, additionally, the friction coefficient, wear capacity, and roughness values are all lower than those under no magnetic conditions. For cast iron materials, the surface roughness value Ra ranges from 0.094 to 0.253 μm after the experiment, it is negatively correlated with relative sliding ratio, load, abrasive particle size, and concentration, while is positively correlated with magnetic induction intensity; The friction coefficient is negatively correlated with relative sliding ratio and magnetic induction intensity in the range of 0.051 to 0.268, and positively correlated with abrasive particle size and concentration. With the load increasing, the friction coefficient first decreases and then increases; The wear capacity of cast iron ring is within the range of 8 to 140 mg. It is negatively correlated with magnetic induction intensity, and positively correlated with relative sliding ratio, load, abrasive particle size, and abrasive concentration. This study provides support for the theoretical research of cast iron as a grinding tool material and provides reference for the rational application of cast iron materials in the field of ultra precision manufacturing.

The investigation on friction and wear properties of cast iron matrix surface compact vanadium carbide layer

Tribological properties of compacted graphite cast iron bearing vanadium under dry sliding

Microstructure, Microhardness and Wear Resistance of VCp/Fe Surface Composites Fabricated in Situ

An investigation of the abrasive wear behavior of ductile cast iron

Study on Friction and Wear of Cast Iron Friction Surface Layer by Laser Cladding

Study on Wear Mechanism of Chromium Carbide Coating Reinforced Cast Iron Cylinder Sleeve

Fabrication and wear property of in-situ micro-nano dual-scale vanadium carbide ceramics strengthened wear-resistant composite layers

Microstructure and abrasive wear properties of high-vanadium-chromium wear resistant alloy

Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron

Improvement in microstructure and wear-resistance of high chromium cast iron/medium carbon steel bimetal with high vanadium

Microstructure, Mechanical and Wear Properties Study of Vanadium Carbide Particles Reinforced Iron Matrix Composite

Friction and Wear Behavior of TaC Ceramic Layer Formed In-Situ on the Gray Cast Iron

Preparation and Wear Resistance of Tungsten Carbide Layer at Gray Cast Iron Surface

Abrasive wear characteristics of in-situ TiC-reinforced iron matrix surface gradient composites

Preparation and wear properties of high-vanadium alloy composite layer

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

Interfacial characteristics and wear resistance of WCp/white-cast-ion composites

Investigation on friction mechanism and wear behavior of SiCp/Z1109

Study on the Friction and Wear Properties of Cast Iron Under Magnetic-Mechanical Coupling Conditions

Fabrication and Dynamics of Two Layers Vanadium Carbide Reinforced Iron Matrix Surface Composite

Investigation on wear behaviors of high-vanadium high-speed steel compared with high-chromium cast iron under rolling contact condition