Abstract:In the production and life of machines, wear is the main form of material failure. Many workpieces and equipment will produce friction and wear during use, causing energy and material consumption, resulting in huge economic losses. In the process of using engineering equipment, in order to improve the service life of the workpiece and improve the wear-resistant material, the research of the material itself must be closely linked with the wear mechanism. Among the antiwear materials, the application of high-chromium cast iron is the most common. The reason is that high-chromium cast iron has a series of advantages in performance, manufacturing technology, and price. However, high-chromium cast iron itself has high C content and high brittleness, resulting in defects in toughness and poor corrosion resistance. When working in harsh environments such as mechanical extrusion, high-strength wear, and chemical corrosion, cracking and deformation are prone to occur, corrosion and peeling, and another damage failure. High chromium cast iron must have a relatively stable structure, good strength and toughness, excellent wear resistance, and corrosion resistance. In this study, the static corrosion performance of high-chromium cast iron was tested to study the effects of Mo and V elements addition and content changes on corrosion resistance and vanadium, molybdenum, and subcritical treatment processes on the microstructure and properties of high-chromium cast iron, in order to obtain better performance. Lower cost high chromium cast iron castings. As a wear-resistant part, high-chromium cast iron castings are widely used in wear and can cope with harsh working environments, but their excellent hardness conditions bring certain defects in toughness and at the same time lack good corrosion resistance, in mechanical extrusion., high-strength wear, chemical corrosion, and other harsh environments are prone to damage and failure. Therefore, high-chromium cast iron should have dual properties, not only high hardness but also suitable for mud, sand, chemicals, and other media corrosion and wear resistance.

Corrosion Wear Behavior of Martensitic Ductile Iron

An investigation of the corrosion–abrasion wear behavior of 6% chromium martensitic cast steel

An investigation of the abrasive wear behavior of ductile cast iron

A New Insight on the Corrosion Behavior and Mechanism of Martensitic Steel

Preparation and Mechanical Properties of High Silicon Molybdenum Cast Iron Materials: Based on Deep Learning Model

Study on friction and wear behavior of gray cast iron with different carbon content at different temperatures

Influence of Corrosion Scale on Cast Iron under the Change of Water Qualities

Comparative Erosion–corrosion and Electrochemical Studies of Ni Austenitic Cast Iron in Acidic Slurry Medium

Study on Abrasive Wear Behaviour of Martensite

Mechanical and tribological behavior of dual-phase ductile iron with different martensite amounts

Air and water lubricated sliding wear of Si3N4 against cast irons

Mechanisms of Carbide and Matrix of 28Cr Cast Iron During Erosion-Wear Process

Effect of Martensitic Reversal and Grain Size on the Corrosion and Wear Behaviour of Cr-Mn Steel

Inter-phase Corrosion of Chromium White Cast Irons in Dynamic State

Two-Body Abrasion Behaviors Characterization of White Cast Iron with Various Chromium Concentrations

Synergism Between Wear and Corrosion of Cr26Mo1 Ferrite Stainless Steels in 0.5 mol/L of Sulfuric Acid

Effect of Chromium Content on Cementite – Pearlite Interaction of White Cast Iron During Three-Body Abrasive Wear

Corrosion Resistance of Austenitic NiMn-Nodular Cast Iron in NaCl Solution

Interaction Between Erosion and Corrosion of Chromium White Cast Irons in Liquid-solid Dual-phase Fluid

Unlubricated Sliding Wear Mechanism of Fine Ceramics Al2O3 and ZrO2 Against High Chromium Cast Iron

Influence of Graphite Morphology and Chromium Content on Tribological Properties of Cast Iron under Dry Sliding