Abstract:Flows around an axisymmetric body of revolution at a zero yaw angle were studied using a hybrid Reynolds-averaged Navier–Stokes (RANS)/large eddy simulation (LES) approach, which employed a full Reynolds stress model (RSM) in the RANS branch with the aim of accounting for the Reynolds stress anisotropy, streamline curvature, and flow separations in the boundary layer. The SUBOFF model without appendages was applied to conduct the simulations, and the Reynolds number based on the free-stream velocity and the length of the body is ReL=1.2×106. The results, including time-averaged Cp, Cf, and velocity statistics, were compared with the experimental data and wall-resolved LES results available in the literature, and the overall agreement of the comparisons was satisfactory. To assess the performance of the RSM-based hybrid RANS/LES approach, we carried out shear-stress transport-based hybrid RANS/LES approach simulations under identical free-stream conditions for comparison. The sensitivity of the hybrid RANS/LES approach to the RANS models was observed for separated flow with surface curvature and adverse pressure gradient-induced separation. The RSM-based hybrid RANS/LES approach was found to provide a better prediction for the unsteady flows near the stern. That is because the effects of the streamline curvature and the strong interactions between individual stresses can be captured by the exact production terms in the RSM-based hybrid RANS/LES approach. These effects are important for predicting the development of turbulent boundary layers along the stern.

Simulation of separation flows with RANS/LES hybrid methods

Numerical study of separation flows with LES/RANS hybrid appoaches

Prediction of Separation Flows Around a 6:1 Prolate Spheroid Using RANS/LES Hybrid Approaches

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Developments and applications of hybrid RANS-LES methods for wide-speed-range flows

Numerical investigation of flows around an axisymmetric body of revolution by using Reynolds-stress model based hybrid Reynolds-averaged Navier–Stokes/large eddy simulation

Study on Supersonic Base Flow Using RANS/LES Methods

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Study of Delayed-Detached Eddy Simulation with Weakly Nonlinear Turbulence Model

A hybrid prediction model for transitional separated flows over rough walls

Improved hybrid model for transitional separated flows over a rough compressor blade

Simulation of low-speed separated flows for the NREL airfoil at high angles of attack

Numerical Simulation of Separated Flow Via 2D Hybrid Grid Technique

An Efficient Numerical Method for Coupling the RANS Equations with Spalart-Allmaras Turbulence Model Equation

SIMULATION OF SEPARATED FLOWS FOR THE NREL AIRFOIL USING ANISOTROPIC TWO-EQUATION TURBULENCE MODELS

Numerical Simulation of Separated Flows over Slender Body at High-Angle-of-attack with K-Ε Model Comforming Realizability

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack