Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Prediction of Separation Flows Around a 6:1 Prolate Spheroid Using RANS/LES Hybrid Approaches

Numerical study of separation flows with LES/RANS hybrid appoaches

Les and Cdns Investigation of T106c Low Pressure Turbine

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Simulation of separation flows with RANS/LES hybrid methods

Numerical investigation of flows around an axisymmetric body of revolution by using Reynolds-stress model based hybrid Reynolds-averaged Navier–Stokes/large eddy simulation

An Improved Hybrid Particle Scheme for Hypersonic Rarefied-Continuum Flow

Developments and applications of hybrid RANS-LES methods for wide-speed-range flows

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder

Scale-adaptive simulation of the separated flow past a 90°-inclined prolate spheroid

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Hybrid turbulence models for flows around a stationary smooth circular cylinder

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

A hybrid prediction model for transitional separated flows over rough walls

Study on Flow Past Two Spheres in Tandem Arrangement Using a Local Mesh Refinement Virtual Boundary Method

Numerical Prediction of Massive Separation Unsteady Flows Around Bluff-Bodies

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Numerical Investigation of Massively Separated Flows Past RLG Using Advanced DES Approaches

Study of Delayed-Detached Eddy Simulation with Weakly Nonlinear Turbulence Model

NUMERICAL PREDICTION OF MASSIVE SEPARATION AND UNSTEADY FLOWS AROUND BLUFF-BODIES