Abstract:Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we investigate fully-developed turbulent pipe flows at moderate-to-high friction velocity Reynolds numbers ($361 \leq Re_{\tau} \leq 2,000$), corresponding to bulk velocity-based Reynolds numbers of $11,700 \leq Re_{b} \leq 82,500$, using wall-modeled Large Eddy Simulations (LES) in OpenFOAM. A grid convergence study is performed for $Re_{\tau} = 361$, followed by an investigation of the accuracy of various subgrid-scale stress models for the same Reynolds number. Results show that the Wall-Adapting Local Eddy (WALE) model performs well compared to experiments and Direct Numerical Simulations (DNS), while One-Equation Eddy-Viscosity Model (OEEVM) and Smagorinsky (SMG) are too dissipative. LES utilizing WALE are then performed for four different Reynolds numbers with gradually refined grids, revealing excellent agreement with DNS data in the outer region. However, a significant deviation from DNS data is observed in the sub-viscous layer region, indicating the need for further mesh refinement in the wall-normal direction to accurately capture the smallest-scale motions' behavior. Additional mesh sensitivity analysis uncovered that, as the $Re_{\tau}$ value rises, it becomes crucial for a grid to adhere to the condition of $\Delta x^{+} \leq 20 - 25$ and $\Delta z^{+} \leq 10$ in order to precisely capture substantial large and small scale fluctuations. Overall, the WALE model enables accurate numerical simulations of high-Reynolds-number, wall-bounded flows at a fraction of the computational cost required for temporal and spatial resolution of the inner layer.

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

A Mixed-Time-scale Low-Reynolds-number One-Equation Turbulence Model

Constrained Large Eddy Simulation of Wall-Bounded Turbulent Flows

A Total-Shear-stress-conserved Wall Model for Large-Eddy Simulation of High-Reynolds Number Wall Turbulence

A dynamic wall model for large eddy simulation of turbulent flow over complex/moving boundaries based on the immersed boundary method

Hybrid Numerical Method for Wall-Resolved Large-Eddy Simulations of Compressible Wall-Bounded Turbulence

Wall-modeled large eddy simulation in the immersed boundary-lattice Boltzmann method

Reynolds-constrained Subgrid-scale Model for Large-eddy Simulation of Turbulent Wall Flows

A Wall-modeled hybrid RANS/LES model for flow around a circular cylinder with coherent structures in subcritical Reynolds number regions

Large Eddy Simulations of Turbulent Pipe Flows At Moderate-To-High Reynolds Numbers

Toward a flow-structure-based wall-modeled large-eddy simulation paradigm

Large Eddy Simulation of High-Reynolds-number Atmospheric Boundary Layer Flow with Improved Near-Wall Correction

Effect of wall stress models and subgrid-scale models for flow past a cylinder at Reynolds number 3900

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers

A wall model for large-eddy simulation of highly compressible flows based on a new scaling of the law of the wall

Off-wall Boundary Conditions for Large-Eddy Simulation Based on Near-Wall Turbulence Prediction

A hybrid prediction model for transitional separated flows over rough walls

Numerical simulation of the flow around a circular cylinder at high Reynolds numbers

Numerical study of separation flows with LES/RANS hybrid appoaches

Wall-modeled large-eddy simulation based on building-block flows