Abstract:The characteristic of static stall for an airfoil is very important for the design of wind turbine. As long as the detailed information of boundary layer separation flow around an airfoil is obtained, the static stall characteristics could be predicted appropriately. In this paper, both two dimensional (2D) and three dimensional (3D) mathematical models are implemented to simulate fluid flow around a NREL S809 airfoil. The steady state compressible Reynolds-Averaged Navier-Stokes equations are adopted and solved numerically in this paper. Both one-equation and two-equation turbulence models (i.e., Spalart-Allmaras and k-omega Shear Stress Transport models) are adopted, respectively, to solve the turbulent viscosity in this paper. The simulation results show that more detailed vortex structures are obtained by using 3D Spalart-Allmaras turbulence model at high attack angle as compared to the two-equation k-omega SST turbulence model, and the obtained aerodynamic performance of an airfoil with Spalart-Allmaras model agrees well with the available experimental data. Therefore, it seems that the 3D Spalart-Allmaras turbulence model is more capable to demonstrate the 3D characteristics of boundary layer separation flow than the k-omega SST model, and it is more efficient to predict the characteristics of static stall for the airfoil. Meanwhile, the simulation results also reveal that the 3D characteristics of separation flow play a very important role for the aerodynamic performance of airfoil after the static stall, and then the 2D mathematical model is no longer suitable to simulate the boundary layer separation flow around the airfoil.

SIMULATION OF SEPARATED FLOWS FOR THE NREL AIRFOIL USING ANISOTROPIC TWO-EQUATION TURBULENCE MODELS

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Simulation of low-speed separated flows for the NREL airfoil at high angles of attack

Numerical Simulation Of Boundary Layer Seperation Flow For Airfoil In A Wind Turbine

Numerical Analysis of Low-Reynolds-number Flow over Airfoil

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Numerical Simulation of 3D Characteristics of Boundary Layer Separated Flow Around Wind Turbine Airfoil

Simulation of Separated Flows at High Angles of Attack for Wind Turbine Airfoil and Its Dynamic Stall

Numerical Analysis of Unsteady Flows at Low Reynolds Number

Detached-Eddy Simulation of Three Airfoils with Different Stall Onset Mechanisms

Numerical Simulation of the Unsteady Flow Field Around a Two-Dimensional Oscillating Airfoil

NUMERICAL SIMULATION OF PITCHING WIND TURBINE AIRFOIL DYNAMIC STALL

Turbulence modelling of deep dynamic stall at low Reynolds number

Turbulence Modeling Of Deep Dynamic Stall At Relatively Low Reynolds Number

RANS Simulation with Transition Prediction Method on Airfoil Flows with Laminar Separation Bubbles

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Numerical Simulation of Separated Flows over Slender Body at High-Angle-of-attack with K-Ε Model Comforming Realizability

Numerical Simulation of a Wind Turbine Airfoil: Dynamic Stall and Comparison with Experiments

Numberical simulation of separation equilibrium of flow around 2D wing configuration at high angle of attack

Numerical simulation of an airfoil for stall regulated HAWT rotors at large angles of attack

Simulation of separation flows with RANS/LES hybrid methods