Abstract:In this study, a high-performance Mg–8Gd–2Y–1Zn–6Li (wt%) alloy having a TYS of 202 ± 2.6 MPa, UTS of 243 ± 2.1 MPa and EL of 10.7 ± 2.3% was successfully fabricated by casting, heat treatment and hot extrusion. The effects of intermetallic compounds on microstructure and mechanical properties were deeply investigated. The results show that the studied alloy consists of coarse deformed α-Mg grains with (0001) basal texture, fine recrystallized β-Li grains with (002) texture and three Mg3RE phase variants, which are bulk Mg3RE phase with a size range of 10–30 µm, spot Mg3RE phase with a size range of 1–2 µm and spherical Mg3RE phase with a size range of 0.3–1 µm, respectively. The spherical Mg3RE phase has a strong dispersion strengthening effect, while the bulk Mg3RE phase acts as crack resources and deteriorates the ductility. A novel island-like <math>β1R</math> phase (FCC, a = 0.78 nm) is found for the first time in the Mg-Gd-Li based alloys. It has a coherent <math>(1̅12)β1R</math>//<math>(101̅0)α</math> interface at the broad facet and a semi-coherent <math>(1̅11)β1R</math>//<math>(112̅0)α</math> interface at the end facet. The <math>β1R</math> phase transforms from <math>βH</math> phase at the semi-coherent interface by atomic shear of RE and Mg atoms. The <math>β1R</math> phase provides a significant precipitation strengthening effect to the studied alloy, while the dissolution of <math>β1R</math> phase results in the age-softening phenomenon. The high-performance of the studied alloy is mainly attributed to the α/β duplex structure, three Mg3RE phase variants, and <math>β1R</math> phase.

Development of Heat Resistant Mg-RE Alloy Piston

Applicability of Mg -Zn-(y, Gd) Alloys for Engine Pistons

Microstructure and Properties of Squeezing Casting Mg-9Gd-1Y-0.5Zr Alloy Piston

Microstructure and Mechanical Property of Mg-Gd-Y-Zr Magnesium Alloy Piston

Creep Behavior of Mg–9Gd–1Y–0.5Zr (wt.%) Alloy Piston by Squeeze Casting

New HPDC Mg-RE Based Alloy with Exceptional Strength and Creep Resistance at Elevated Temperature

Development of high mechanical properties and moderate thermal conductivity cast Mg alloy with multiple RE via heat treatment

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Numerical Simulation of Filling process of Heat Resistant Mg-RE Alloy Piston in Permanent Mold Casting

Microstructure and Mechanical Properties of a Novel Mg–RE–Zn–Y Alloy Fabricated by Rheo-Squeeze Casting

Tailoring Multiple Strengthening Phases to Achieve Superior High-Temperature Strength in Cast Mg-RE-Ag Alloys

Microstructure Evolution Mechanism and Mechanical Properties of Mg-RE Alloy at a Critical Transition Temperature of Material Performance

Microstructure and Elevated Temperature Mechanical and Creep Properties of Mg–4Y–3Nd–0.5Zr Alloy in the Product Form of a Large Structural Casting

Influence of Heat Treatment on Microstructures and Mechanical Properties of Gravity Cast Mg–4.2Zn–1.5RE–0.7Zr Magnesium Alloy

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment

Effects of chemical composition on the microstructure and mechanical properties of gravity cast Mg-xZn-yRE-Zr alloy

Microstructures and mechanical properties of as-extruded Mg–8Gd–2Y–1Zn–6Li alloy

Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing

Isothermal Precision Forging Process of Mg-RE Alloy Component With High-Rib and Thin-Web

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion