Abstract:The effects of MoS2 and MoS2 modified by adding oleic acid (OA) on the friction properties of lithium-based grease under boundary lubrication conditions are studied by molecular dynamics (MD) simulation and experiment. A rough wall boundary lubrication MD model with peaks and grooves is established to simulate the mechanical properties and lubrication effects of three lubrication systems on rough walls for the relative shear velocity between the two solid walls of 5 m/s at 500 MPa. The stress, wear amount, friction force, normal pressure, and friction heat of the friction surface are quantitively calculated. Simultaneously, a Retc friction and wear testing machine is used to measure the friction coefficient under different concentrations of additives and different pressures. The results show that the grease added with MoS2 can reduce friction, wear, and the temperature between friction pairs. However, under high pressure and shear, MoS2 can easily agglomerate and accumulate in the pits, reducing the lubricating effect. At the same time, since OA-modified MoS2 can reduce agglomeration, the modified MoS2 is adsorbed on the metal wall surface, forming a stable lubricant film. The main contributions of this article can be found in combining MD simulation and experimentation, establishing the connection between micronano structures and macroscopic properties, exploring the mechanism of the influence of wall roughness and particle size on the friction performance of lubricating oil, and providing a theory for predicting and developing high-performance new lubricating grease.

STUDY ON THE TRIBOLOGICAL PROPERTY OF ULTRA-FINE WS_2 POWDER IN MOTOR OIL

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Tribological Properties of Sulfur- and Phosphorus-Free Organic Molybdenum Compound As Additive in Oil

The Study on Tribological Property of Muscovite as Mineral Lubricating Oil Additive

Synergistic effect and long-term lubricating mechanism of WS2/oil combinations determined via oil molecule structures in vacuum

Tribological Properties of WS2 Composite Film Prepared by a Two-Step Method

Tribological Behavior of WS2 Nanoparticles as Additives in Calcium Sulfonate Complex–Polyurea Grease

Interactive effect between WS2 films with different structures and space oils for improvement of tribological performance

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Microstructure and Tribological Properties of Co-sputtered MoS2/WS2 Composite Films

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

The Synergistic Effects of Oil Additive Sulphurized Olefin with Chemico-Thermal Treatment Surfaces of Steel

The Tribological Behaviors and Mechanism of Carbon Nanotubes as Oil Additive

The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

Frictional behavior and tribo-carbonization of a synthetic engine oil (SJ/CF/5W-30) with different tribo-materials under stepwise heating conditions

Study on the Sliding Tribological Behavior of Oleic Acid-Modified MoS 2 under Boundary Lubrication

A Study on the Tribological Performance of an Organic Cadmium Compound as a Lubricant Additive

Optimization of the Rheological Properties and Tribological Performance of SAE 5w-30 Base Oil with Added MWCNTs

WS2 nanorods prepared by self-transformation process and their tribological properties as additive in base oil

Tribological Properties of Molybdenum Disulphide Nanoparticles in Soybean Oil