The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

Yue Wen,Wang Chengbiao,Tian Bin,Liu Yuandong,Liu Jiajun

DOI: https://doi.org/10.3969/j.issn.0254-0150.2007.11.028

2007-01-01

Abstract:The tribological properties of the steel/Al-Sn alloy friction pair lubricated by oil with a mineral additive was investigated under low and high load on pin-on-disc sliding friction and wear tester.The worn surface of an Al-Sn alloy bush got from a locomotive engine after using the mineral additive was analyzed.The evaluation was completed using SEM/EDS and AFM.The results show that the mineral additive displays higher antiwear and antifriction properties under lower load condition.As the test distance is longer,the antifriction effect of the additive is obviously better.The distribution of Al-Sn eutectic phase becomes more dispersed.The roughness of the worn surface is much lower than that of the original surface.On the worn surface of bush,some Fe element,wear debris and additive particles embeded on the worn surface are found,thus the additive improves the load bearing capacity of Al-Sn alloy.The mineral additive obviously increases the antiwear and antifiction properties and extends the service life of the steel/Al-Sn alloy friction pair.