Abstract:The tribological performance of copper-based powder metallurgical material is much influenced by the interfacial bonding between the components and matrix. By adding Cu-coated or uncoated graphite particles as a lubricant, two types of copper-based powder metallurgical materials were prepared via spark plasma sintering (SPS). The hardness, relative density, and thermal conductivity of the two specimens were firstly measured. Using an inertial braking test bench and temperature measuring instrument, the average friction coefficients, instantaneous friction coefficients, and friction temperatures of the two specimens were tested under different test conditions, and the wear rates were calculated accordingly. Based on the analysis of surface morphologies and elements distribution after the tests, the mechanisms of wear and formation of friction films were discussed. The results show that with the lubricant of Cu-coated graphite, the hardness, relative density, thermal conductivity, and interfacial bonding between the graphite and matrix can be greatly improved. Under the same test condition, the average friction coefficient, wear rate, and friction temperature of the specimen with added Cu-coated graphite are both lower than those of the specimen with added uncoated graphite. The two specimens show different variation trends in the instantaneous friction coefficient during the tests, and the variation of the instantaneous friction coefficient at a high initial test speed is also different from that at a low initial test speed for each specimen. The two specimens also show differences in the continuity of friction film and the content of graphite and oxide in the friction film.

Tribological Behaviors of Inconel 718–tungsten Carbide Friction Pair with Sulfur Additive Lubrication

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Effect of lubricant additives on the tribological behavior of aluminum alloy against steel

Synergistic low friction effect and mechanism of inorganic fullerene-like tungsten disulfide and talcum at the interface of steel tribo-pairs under severe conditions

Study on the Synergistic Effect between the Plasma Nitrided Steel Surface and Different Lubrication Additives

Tribological Investigations on Additively Manufactured Inconel 718 Features with Silicon Carbide Ball: Role of the Tribo-Oxide Layer

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

The Synergistic Effects of EP and AW Additives with Oxynitrided Surface of Steel

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Friction Mechanism of Sulfur-Containing Lubricant Additives Confined between Fe(100) Substrates

The Tribological Properties of Low-Sulfur and Low-Phosphorus Halogen-Free Ionic Liquids as Lubricants for the Nickel-Based Alloy Inconel 690

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Effect of lubricant additives of Cu, Fe and bimetallic CuFe nanoparticles on tribological properties

The Synergistic Effects of Oil Additive Sulphurized Olefin with Chemico-Thermal Treatment Surfaces of Steel

The Synergistic Effects of Tricresyl Phosphate Oil Additive with Chemico‐thermal Treatment of Steel Surfaces

Study on Tribological Behavior of Nanocopper Lubricant Additive by Four-ball Tester and its Lubricating Mechanism

Synergetic effect between the surface treated with ion nitriding and extreme pressure-antiwear additives under boundary lubrication

The Synergistic Effects of EP and AW Additives with a Sulphurised Steel Surface under Boundary Lubrication