Abstract:Purpose This study aims to form composite solid lubricant coatings on the surface of bearing steel, which can significantly improve the tribological properties of thrust cylindrical roller bearings (TCRBs). Phosphating films possess microscopic porosity that typically needs to be sealed with oil, grease or wax. Due to its unique crystal structure, the phosphating film itself also exhibits a certain degree of lubricity. In this study, solid lubricants are used to fill the pores of the phosphating film. By combining the phosphating film with solid lubricants, lubrication and wear reduction can be achieved. Design/methodology/approach In this study, the surfaces of the shaft washer (WS) and seat washer (GS) were treated with zinc-phosphating. Subsequently, a solid lubricant solution (polytetrafluoroethylene [PTFE], MoS 2 and graphite) was sprayed onto the phosphated samples at concentrations of 1 , 2 and 3 g/L. The porous and adsorptive nature of the phosphating film was used to embed the solid lubricant particles into the film, thus forming a composite lubrication layer containing solid lubricants on the surface of the bearing steel. Findings The addition of solid lubricant materials has shown significant potential in reducing wear losses compared with phosphated samples without such additives. Increasing the amount of solid lubricant added can facilitate the formation of a transfer film, which further enhances the protective properties. However, it is important to note that excessive amounts of solid lubricant material can contribute to seizure, leading to increased wear losses of the cage and a higher average coefficient of friction (ACOF).By spraying a PTFE solution with a concentration of 2 g/L, the lowest ACOF and cage wear loss were achieved, resulting in reductions of 60.5% for the ACOF and 89.4% for the cage wear loss. Similarly, when spraying a graphite solution with a concentration of 3 g/L, the lowest wear losses for GS and WS were observed, with reductions of 51.7% for GS wear loss and 38.9% for WS wear loss. Originality/value The combination of the phosphating film and solid lubricants aims to achieve lubrication and wear reduction, providing a new approach to wear-resistant technology for TCRBs. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0231/

The Synergistic Effects of Tricresyl Phosphate Oil Additive with Chemico‐thermal Treatment of Steel Surfaces

The Synergistic Effects of Oil Additive Sulphurized Olefin with Chemico-Thermal Treatment Surfaces of Steel

The Synergistic Effects of EP and AW Additives with Oxynitrided Surface of Steel

The Synergistic Effects of EP and AW Additives with a Sulphurised Steel Surface under Boundary Lubrication

Synergetic effect between the surface treated with ion nitriding and extreme pressure-antiwear additives under boundary lubrication

Study on the Synergistic Effect between the Plasma Nitrided Steel Surface and Different Lubrication Additives

Tribological Behaviors of Steel Surfaces Treated with Ion Sulphurization Duplex Processes

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Synergistic Effects between Plasma-Nitrided AISI 52100 Steel and Zinc Dialkyldithiophosphate Additive under Boundary Lubrication

Synergistic low friction effect and mechanism of inorganic fullerene-like tungsten disulfide and talcum at the interface of steel tribo-pairs under severe conditions

Surface characterization of steel/steel contact lubricated by PAO6 with novel black phosphorus nanocomposites

Voltage-Assisted Tribofilm Formation of Sulfur- and Phosphorus-Free Organic Molybdenum Additive on Bearing Steel Surfaces in Industrial Base Oils

Study on Tribological Behavior of Mg6Si4O10(OH)8 Additive Package with Steel Tribo-Pair

Effect of lubricant additives on the tribological behavior of aluminum alloy against steel

Nano Magnesium Silicate Hydroxide as Synergistic Lubricant Additive With Micro Carbon Sphere for Enhanced Tribological Properties

Synergistic effect of surface sinusoidal textures and oxide layer on tribological properties of 40Cr alloy steel

Surface nanocrystallized structural steel with enhanced tribological properties under different sliding conditions

Tribological Properties of Phosphorus and Sulfur-Free Organotungstate Additive on Plasma Nitrided Surface of Bearing Steel

Effect of composite solid lubricant coatings on the tribological performance of thrust cylindrical roller bearings

The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

Enhanced tribological properties of sliding contacts through the synergistic effect of PTFE film and PSAIL 2280