Abstract:Nickel-coated flaky graphite particles () have been widely employed as key fillers of electromagnetic functional composites. However, the existing such fillers suffer from disadvantages of uncompacted shells, unsatisfactory conductivity or high nickel content, making it hard to meet high requirements for electronic connection and electromagnetic compatibility. Herein, we have demonstrated an efficient approach to achieving sufficiently heterogeneous nucleation coupled with electroless Ni plating to fabricate highly conducting with low Ni content for excellent electromagnetic properties of polymer-matrix composites. Preparation of the typical consists of rinsing flaky graphite particles (FGPs), adsorbing nickel ions, in-situ reduction into nickel nuclei and electroless Ni plating. On the one side, the hydrophilicity of FGPs can be improved by soxhlet extraction. This is one of important factors to adsorb more nickel ions on FGPs because they can be uniformly dispersed or fully exposed to NiSO4 solution. On the other side, the rinsed FGPs are immersed into a high concentration ([NiSO4]) solution, which facilitates to further adsorb enough nickel ions through electrostatic attraction. Subsequently, these nickel ions adsorbed on FGPs are in-situ reduced into a lot of nickel nuclei, indicating that increasing hydrophilicity and immersing into a high [NiSO4] for FGPs synergistically favor heterogeneous nucleation burst. Finally, low content nickel densely-coated FGPs composite particles are successfully synthesized by controllable electroless Ni plating. As-obtained exhibit dense shells, low Ni content and excellent electrical conductivity compared to the commercial (). Furthermore, shielding effectiveness of composites containing the typical is between 28.0 and 35.2 dB with frequency of electromagnetic wave ranging from 30 to 1500 MHz, and stronger than that of composites containing , owing to the relatively high electrical conductivity. Consequently, this work holds a promising potential for electromagnetic functional polymer-matrix composites.

Preparation for the Hollow Nickel Fibres of the Positive Current Collector by Electroless Plating Technique

Preparation of Hollow Nickel Fibres by Electroless-Plating Technique

Preparation and Characterization of Nano-Particles Nickel Hollow Fibers

Ni Plating on Carbon Fiber on the Condition of Alkali

A Study on the Surface Oxidation Pretreatment and Nickel Plating Mechanism of Carbon Fiber

Hollow Nickel Fibre Felt for Current Collector of Ni/MH Battery

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Fabrication of Al-Ni nanofibers by selective etching

ELECTROLESS PLATED MULTIWALLED CARBON NANOTUBES FOR REINFORCING METAL-MATRIX COMPOSITES

Fabrication of highly conducting nickel-coated graphite composite particles with low Ni content for excellent electromagnetic properties

Effect of nickel electroplating followed by a further copper electroplating on the micro-structure and mechanical properties of high modulus carbon fibers

Study on new process of electroless copper plating pretreatment on carbon fiber surface

Preparation and characterisation of the Ni-C composite coating electrodeposited with carbon sol

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

Strain-Durable High-Conductivity Nylon-6 Fiber with 1D Nanomaterial Lamellar Cladding for Massive Production

Preparation and Electrical Conductivity of Pt/NiO Nanofibers

Preparation of nylon 6/PLA blend nanofibers by needleless electrospinning

Investigations of the Interface Design of Polyetheretherketone Filament Yarn Considering Plasma Torch Treatment

Adhesion Enhancement Between Electroless Nickel and Polyester Fabric by A Palladium-Free Process

The Effect of Pulse Current on Electrolytically Plating Nickel as a Catalyst for Grafting Carbon Nanotubes onto Carbon Fibers via the Chemical Vapor Deposition Method

Electrochemical co-deposition of carbon nanotube/Ni composite layer