Abstract:Lithium (Li) metal anodes are critical components for next-generation high-energy density batteries, owing to their high theoretical specific capacity (3800 mAh.g(-1)) and low voltage (-3.040 V versus the standard hydrogen electrode). However, their applications are hindered by dendrite growth, which potentially induces inner short circuit and leads to safety issues. Employing three-dimensional (3D) current collectors is an effective strategy to suppress dendrite growth by decreasing the local current density. However, many of the reported 3D current collectors have a lithiophobic surface, which leads to non-uniform Li+ ion deposition. Thus, a complicated modification process is required to increase the lithiophilic property of the current collectors. In addition, they have a large weight or volume, which greatly lowers the energy density of the entire anode. In this work, we report a lightweight 3D carbon current collector with a lithiophilic surface by employing the direct carbonization of low-cost bacterial cellulose (BC) biomass. The current collector is composed of electrically conductive, robust, and interconnected carbon nanofiber networks, which provide sufficient void space to accommodate a large amount of Li and buffer the volume changes during Li plating and stripping. More importantly, homogeneously distributed oxygen-containing functional groups on the nanofiber surface are retained by controlling the carbonization temperature. These functional groups serve as uniform nucleation sites and help realize uniform and dendrite-free Li deposition. Notably, the areal mass density of the 3D carbon current collector was only 0.32 mg.cm(-2) and its mass ratio in the whole anode was 28.8%, with a capacity of 3 mAh.cm(-2). This 3D carbon current collector facilitates the stable working of the half cells for 150 cycles under a high current density of 3 mA.cm(-2) or a high capacity of 4 mAh.cm(-2). Symmetric cells exhibit a steady cycling life as long as 600 h under a current density of 1 mA.cm(-2) and a capacity of 1 mAh.cm(-2). Moreover, appreciable cycling performance was realized in the full cells when the anodes were paired with LiNi0.8Co0.15Al0.05 cathodes. Furthermore, the low-cost raw materials and the simple preparation method promise significant potential for the future applications of the proposed 3D current collectors.

Hollow Nickel Fibre Felt for Current Collector of Ni/MH Battery

Preparation for the Hollow Nickel Fibres of the Positive Current Collector by Electroless Plating Technique

Preparation of Hollow Nickel Fibres by Electroless-Plating Technique

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

Powder metallurgical 3D nickel current collectors with plasma-induced Ni 3 N nanocoatings enabling long-life and dendrite-free lithium metal anode

Lithium Manganese Aluminum Oxide-Based Full Li-ion Battery Using Carbon Fibers As Current Collectors

Aligned carbon fibers–carbon nanotube–polymer–based composite as lithium-ion battery current collector

Lightweight 3D‐net Copper‐Plated Polyimide Current Collector for Lithium‐Ion Batteries

One-dimensional conductive Ni 3 (HHTP) 2 @ woven fabrics with controlled engineering design towards high-efficiency EDL electrodes

Three-Dimensional Nickel Foam-Based Lithiophilic LPP-Ni3S2@Ni Current Collector for Dendrite-Free Lithium Anode

One-dimensional Conductive Ni3(HHTP)2 @ Woven Fabrics with Controlled Engineering Design Towards High-Efficiency EDL Electrodes

Bacterial Cellulose-Derived Three-Dimensional Carbon Current Collectors for Dendrite-Free Lithium Metal Anodes

Ni0.33co0.66(Oh)F Hollow Hexagons Woven By Mwcnts For High-Performance Lithium-Ion Batteries

Preparation and characterization of thick-film Ni/MH battery

Highly Conductive, Light Weight, Robust, Corrosion‐Resistant, Scalable, All‐Fiber Based Current Collectors for Aqueous Acidic Batteries

Lightweight Polymer-Carbon Composite Current Collector for Lithium-Ion Batteries

Braided Fiber Current Collectors for High‐Energy‐Density Fiber Lithium‐Ion Batteries

A dual layer Ni/Ni-YSZ hollow fibre for micro-tubular SOFC anode support with a current collector

Metallic Glass‐Fiber Fabrics: A New Type of Flexible, Super‐Lightweight, and 3D Current Collector for Lithium Batteries

The Manufacture and Investigation of 3D Current Collectors in a Lithium Ion Battery Obtained by Laser Powder Bed Fusion